2008年1月17日 · TIG 10 to 15 MIG 25 to 30. He is not the same as AR the regulator is marked diferent. Argon works great for aluminum there is no need for HE unless you are doing …

2017年1月30日 · Argon tank refills for me are nearly always 2,000 psi on the gauge. I use CO2 on my MIG and those generally show 900-1000 at 70 deg. F. If it gets hotter, the pressure will go …

2024年10月7日 · When an 80 cu/ft argon / CO2 cylinder is filled, what should the psi be? The last time I had it filled, it didn't seem right and didn't last as long as usual.

2023年2月8日 · Sure, no problem other than making sure that your box contains only argon. Typically, an air tight glove box is used with a Schlenk line to purge the air after putting your …

2012年4月26日 · In many cases, a blanket that stays put will do the job better than several complete headspace volumes of nitrogen. Argon is the cheapest and most effective means for …

2012年4月24日 · Re: found a oxygen tank can it be filled with argon Things have changed a lot in the last 10 years of the Bottled Gas Industry.There have been so many Buyouts by Airgas , …

2015年1月2日 · I'm trying to get into welding with argon c02 (c25 mix). In Hawaii I went to airgas but they quoted me $440 to get a C25 mix 80cf. Thats tank plus first fill. And $140 to refill the …

2010年3月6日 · If you’re welding steel, the gas of choice is C-25 [argon-75%, Co2-25%] next is 100% Co2. 100% argon is for welding aluminum and gives poor results for steel. Having a …

2011年8月27日 · An argon bottle can be transported lying down. No problem. Since nobody else has said it, an acetylene bottle, if transported on it's side, but be allowed time to settle before …

2019年11月26日 · Example: argon flow = 20 cfh; helium flow = 20 * (2.69/0.85) = about 63 cfh. But where do the correction factors come from? It all starts with the periodic table of the …