2009年9月20日 · G187 and G188 are both in the throttle body itself. http://www.audidatabase.com-a.google...ne_english.pdf Page 31 will show the ECU control of each component.

A8 / S8 (D3 Platform) Discussion - Throttle Body G188 Sensor - Today I discovered a new fault while trying to enable adaptive brake lights via VCDS (I don't think you can on the S8/A8). There are no dash lights, and I'm not exhibiting any of the symptoms that members on other forums have described. But, I don't think...

17579/P1171/004465 - Angle Sensor 2 for Throttle Actuator (G188) Implausible Signal Possible Symptoms Malfunction Indicator Lamp (MIL) active Possible Causes Angle Sensors 1/2 for Throttle Actuator (G187/G188) faulty Power Supply for Angle Sensors 1/2 for Throttle Actuator (G187/G188) faulty

When found in the 2005 - 2009 NAR (North American Region) Audi TT, A3, A4, A6, Q7 with a FSI engine check TSB 97-08-25 or 2018260 for a wiring repair at the Throttle Body.

16605/P0221/000545 - Angle Sensor for Throttle (G188): Implausible Signal Possible Symptoms Malfunction Indicator Light (MIL) active Possible Causes Wiring/Connector (s) from/to Throttle Body Control (J338) faulty Possible Solutions Check Throttle Body Control (J338) See Measuring Value Blocks (MVB) 060+

2014年4月15日 · Summary: The vehicle is still producing the "Angle Sensor 2 for Throttle ( G188 )" error. So far, I have replaced the following parts: --Installed brand-new OEM replacement throttle pedal (Part# 7L0723507D) pictured here --Installed new replacement throttle body (Part#03H133062) pictured here Prospective Troubleshooting:

2020年4月26日 · New Member Welcome Area - Audi a3 2008 000546 - Angle Sensor 2 for Throttle (G188) Error - Hi guys I have this error on my beloved audi a3. Yom 2008 october. I have replaced plugs, coil packs but the issue keeps recurring. Please advise as am on the verge of selling the car at a very low price and need it for my daily...

2023年2月24日 · Normed load value: 16.5 % Vehicle speed: 58 km/h. Coolant temperature: 65 °C. Intake air temperature: 30 °C. Ambient air pressure: 970 mbar. Voltage terminal 30: 14.465 V. Unlearning counter according OBD: 40. Mass flow through throttle valve: 1.4 kg/h. Mean injection time: 0.895 ms. Engine operating condition: Deceleration.

2013年9月17日 · Hi, Had the wiper motor changed - the ECU and battery was disconnected Car in limp mode with following codes : #1) 17987 - Throttleactuator - adaptation not started. Code 17987 17987/P1579/005497 - Ross-Tech Wiki #2) 17951 - Angle Sensor 1 for Throttle Actuator (G187) #3) 17580 - AngleSensor 2 for Throttle Actuator (G188), Signal too Low Audi A4 B5 1999 Auto Can clear the codes with handheld ...

2022年11月14日 · I was expecting this to be a wheel bearing/abs sensor fault but VCDS came up with the G188 throttle body variable resistor. The fault will go away but will come back up no matter what the driving conditions are. 1. Oil change. 2. Fit new wheel arch liner (driver's side). 3. Tighten the wiper motor bolts.