2020年7月1日 · In looking at scehmatics, ALL of the Front Axle Pins #6216 are installed Back-to-Front...except for the C-195. It is the ONLY axle pin I can find that goes in Front …

2013年2月19日 · Mine had minor wear on the tractor side as well as the axle side.. I installed a new pin on the tractor side and that fixed that. The axle side, we bored and install a bronze …

2013年8月21日 · Does anyone happen to know why Terramite uses the axle pin design to hold the front plate on which the steering cylinder and the front wheels are mounted? Mine keeps …

2009年7月30日 · Haven't removed the pivot pin on my 1964 MF-135 diesel yet. The I&T manual just says to remove the pin--implying that it's supposed to slip out of the bushings once the …

2012年2月16日 · It should be as simple as taking the weight off the axle ,just jack the front up so that theres no weight on the pin.Remove the bolt that holds the pin in and pull the pin out …

2016年1月3日 · After finding all of my tractors had at least somewhat worn front axle pivot pins I decided to make new ones. I have made the new pins to use a 1/8 x 1-3/4 cotter key instead if …

2020年11月9日 · The front pivot pin, located in the axle assembly is easy to remove and replace. The rear pin in located in the front sub frame and (I think) would require removal of the whole …

2006年3月23日 · The other day I noticed a leak that appears to be coming from the pivot pin on the front axle of my BX. It's either age or FEL use, but regardless it needs to get fixed. …

2006年3月23日 · I mic'd the pin while I had it out and found it to be within a few thousands of stock diameter over the wear areas so I don't think it needs to be replaced. The only other …

2001年7月18日 · I reused the axle nut and bought a standard cotter pin. To remove the bushings, I cut a horizontal groove in the sidewall of each bushing with a Dremel tool abrasive cutoff …