2008年5月1日 · Our goal is to make this stock-block B16A hit 500+hp without the need for major engine work.

2021年5月7日 · For a turbo car, the best stock gearset is a GSR Transmission with a 4.4 final drive. This transmission works well on the street and is geared almost perfectly for the 1/4. We typically take stock GSR gearsets to ~500-600WHP and …

2009年3月14日 · Let's say you have a 50 trim turbo, THAT I would run around 8-9lbs on a stock b16a, and of course with a GREAT tune. Yield around 250-275whp, conservative and SAFE tune.

Stock Specifications: B16A 81mm Bore x 77.4mm Stroke - 7.995" Block Height B18C 81mm Bore x 87.2mm Stroke - 8.350" Block Height

2006年12月30日 · You can run ITR, CTR, and the Skunk2 Stage 1 cams (not sure about the new pro-series cams, they might have a bigger lift than the original Skunk2 Stage 1's) using your stock springs and retainers as long as you keep the stock redline of 8200.

2018年4月5日 · To start with, a standard B16A or B16B will do; their stock internals can withstand about 300whp. The main performance parts that you will need are a TD05-16G turbocharger (Evolution 8) along with a turbo manifold and an intercooler, oil …

2022年11月1日 · While stock B16 performance is impressive, the 1.6L 4-cylinder truly comes alive when modifications are introduced. Due to the fact that the B16 has strong internals from the factory, it is able to withstand nearly 100 more horsepower than stock without the need for any serious internal upgrades.

2009年11月21日 · Depends MAJORLY on the condition of the motor but 300whp is a good stopping point on a b16. My buddy Rick has had his stock Si boosted for 6 years now, 300whp and daily drives it everyday.

2011年12月25日 · There are no base maps for that specific engine as it is very rare. Start with a B16A calibration and begin tuning from there.

2009年3月18日 · 1 quick question, ive been searching for about 4 hours today, trying to figure out if the stock b16 that comes in the del sol,b16a2 USDM, would be identical to the jdm engine b16a2. just trying to figure if all the parts would work on the motors. example, if the usdm motor distributor, axles, etc... if you could swap parts from one to the other.