The P1083 BMW code indicates a fuel control mixture that is lean in Bank 1 Sensor 1 of the vehicle's engine. This means that there is an imbalance in the air-fuel ratio being delivered to the engine, with more air than fuel present.

2015年1月6日 · I bought a code scanner and got p0171, p0174, p1083, and p1085. I was told the maf was at fault so i bought a new one. I erased the codes but the SES light came back on after driving for about 30 minutes. what can it be

The BMW P1083 code refers to a fault in the fuel control mixture, specifically indicating that the mixture is too lean on bank 1 sensor 1. This means that there is not enough fuel being delivered to the engine, which can cause a range of issues such as reduced power, poor fuel economy, and increased emissions.

2023年4月18日 · Repair Information for P1083 BMW code. Learn what Fuel Control Mixture Lean Bank 1 Sensor 1 means, location and how to repair?

2020年3月29日 · My fuel consumption is about 15L/100km in city and 7-8L/100km on the highway. Car shakes a fair bit in idle on a cold start but smoothes out really nicely after 10 seconds or so. No power loss really... I did a 0-100 and clocked 6.8 seconds. I've researched these codes everywhere and these are not the normal fuel trim codes people get.

2023年7月10日 · P1083 = Fuel Control Limit Mixture Too Lean (Bank 1, Sensor 1) Some items I've already serviced/replaced: Checked intake boots , they're still relatively soft, not stiff or brittle.

2013年1月12日 · I am getting P0171, P0174 and P1083. The car seems to have a rough idle, and usually the very first time I stop at a red light the RPM's dip and it almost seems like it is going to shut off. This only seems to happen the first time I come to a stop in the morning. In general, other than the rough idle, the car runs fine.

2009年1月16日 · my car shakes while idle and when i checked for error codes it showed P1083 Fuel Control Mixture Lean (Bank 1 Sensor 1) P1085 Fuel Control Mixture Lean...

2014年4月4日 · I own a 2002 330ci BMW. I did am oil change today. I took off my intake in order to have easier access to that oil filter. Everything went smooth when I put it all back together. When I was driving it later on, I got codes P1083 p1085 p0171 p0174. Not …

2009年10月16日 · P1083 Fuel control limit too lean Bank 1 Sensor 1; P1085 Fuel control limit too lean Bank 2 Sensor 1; Upon searching previous post on this forum it seems that either I now have an intake leak or I may have fouled my O2 sensors with the silicone gasket sealant I used on the new valve cover gasket.