16-Channel, 1-Pin Female BNC, 68-Pin Female SCSI, PXI Multifunction I/O Module Terminal Block—The BNC-2090A is a desktop or rack-mount analog breakout terminal block that you can connect to compatible PXI Multifunction I/O Modules.

The BNC-2110 simplifies the connection of analog signals, some digital signals, and two user-defined connections to the data acquisition device while maintaining the integrity of your measurements with a shielded enclosure. It includes a DIN Rail and a desktop mount option.

模拟输出(ao) 系列多功能数据采集(daq) 设备配合使用时的安装配置方法及产品规范。 无论在实验室、测试应用或生产环境中，bnc-2110 都是您简化测试设备和daq 设备连接的 理想选择。bnc-2110 具有下列产品特性：

bnc-5650是简化实验室、测试和生产环境中测量设备和daq设备之间连接的理想选择。适用于pci5650、pcie5650、pxi5650、pxie5650、pci5654、pcie5654、pxi5654、pxie5654多功能数据采集（daq）设备。

This installation guide describes how to install and configure your BNC-2110 accessory with 68-pin or 100-pin E/M/S Series or 68-pin NI 671x/672x/673x Analog Output (AO) Series multifunction data acquisition (DAQ) devices. This document also contains accessory specifications.

desc:BNC-2110 是一款用于连接 68/100 引脚 E/M/S 系列或 68 引脚 NI 671x/672x/673x 模拟输出 (AO) 系列多功能数据采集 (DAQ) 设备的 BNC 适配器，可用于实验室、测试应用或生产环境中简化测试设备和 DAQ 设备连接。

The BNC-2115 is a desktop and DIN rail-mountable BNC adapter you can connect to data acquisition (DAQ) devices. The BNC-2115 includes 24 BNC connectors and a two-position screw terminal.

USB-1616HS-BNC: DAQ device with 16 SE/8 DIFF analog inputs, 16-bit resolution, 1 MS/s sample rate, 2 analog outputs, 24 digital I/O, and 4 counter inputs. Quickly find what you need to get started and reduce mean time to measure.

2021年7月26日 · I would like to ask about the type of the BNC (sensors outputs) to pin (inputs of DAQ) connectors that can work for the below items. I want to connect the PCB Low noise coaxial cable (10 ft w/10-32 plug to BNC plug; SN: HC9019377) to DAQ (USB-6003 16-Bit 100 kS/s ; …

2024年5月13日 · Use the BNC-2110 BNC connectors on the front panel to connect AO <0..7> signals to your DAQ device. The number of connectors you use depends on your DAQ device and application. E/M/S Series DAQ devices can only use the AO <0..1> BNCs.