BRAND NEW Kode Turbo upgrade for BRM engines, from 140 HP 8 valve TDI in Europe. This turbo is a good mild upgrade from the Borg-Warner stock turbo. Can easily run 24 PSI and boost is less likely to creep when running more fuel.

This turbo is an upgrade for your 2005.5-2006 BRM Jetta. This turbo is used on the 140hp European Cars. This is a great upgraded turbo to add to your Jetta. Turbo kit includes our Turbo install gasket kit. This turbo will boost at 24psi with tuning.

The PD140 turbo was the stock turbo for the European PD140 1.9 TDI BMM engine. The PD140 turbo also eliminates the boost creep that the stock BRM turbo is known for. The GTB1646mv design will also allow for more exhaust flow and reduce the exhaust manifold pressure.

2019年9月9日 · The turbo on a BRM engine can be removed from the top on a 2006 Jetta. It requires removal of the valve cover to have enough clearnance to get it out. The PD140 turbo I installed to replace it fit in the same available space it took to remove the old one.

Kerma Power Plus hardware and tuning package for BRM engine found in the 2005.5-2006 Jetta supports more than 150HP! (We conservatively call it a "150 kit".) That's a whopping 57% more power than stock on the BRM Engine, minimum, in a proven, turn-key package!

2012年5月30日 · I finally got around to running a dyno on my '06 BRM with an upgraded PD 140 turbo and PD 150 injectors and of course a tune from Jeff at RocketChip. Lots of people helped pull this together, my thanks to them all. The car is wonderful to drive, a great mix of power and torque. They should have come this way.

Garrett PD140 turbocharger imported from Europe. Runs safely at 24 lbs of boost, and doesn’t suffer from the boost creep that the stock BRM turbo is sometimes known for. Requires a tune and a 3-bar MAP sensor to delete the smart actuator, otherwise you will have a check engine light. Fits the Following:

popular upgrade for BRM 1.9L tdi engine. Airflow Rated for 160 WHP. this turbo is a 100% bolt-on option ! WE HIGHLY RECOMMEND TO BUY OUR OUR FEED LINE KIT FOR AN EASY FITMENT. Exhaust side is pretty similar to the GTB vanes system design which allow much more exhaust flow and reduced EMP.

BRM / PD 140 - Includes: 12 x Copper Nuts; 1 x Downpipe Gasket; 1 x Exhaust Manifold Gasket with Heat Shield; 1 x Quad Seal for EGR; 1 x EGR Throttle Seal; 1 x Composite Oil Return Gasket; 1 x Metal EGR gasket - EGR pipe to EGR Cooler; 1 x Narrower EGR Gasket - turbo to EGR Pipe; 1 x Intake Manifold Gasket