How to make multiple top surfaces smooth - Bambu Studio
2023年9月23日 · You can improve the quality by slow down the top surface speed and top surface accelleration.
Why my Top layer finish is really bad? - Bambu Lab X1 Series
2023年2月22日 · Hi Folks, i’m suddenly getting really poor top surface finishes on my X1C for flat prints (image here is white Overture PLA @ 220C). I do the automated flow calibration every time. Any thoughts on this?
Top surface pattern - Bambu Studio - Bambu Lab Community Forum
2024年9月19日 · Hi everyone! According to the Infill Patterns | Bambu Lab Wiki: If the object has no holes, the surface finish would be nice. However, if it does have holes, you might end up with redundant material. Is there a way to achieve a smooth …
Force top surfaces to be fully covered - Bambu Studio - Bambu …
2024年10月27日 · Goal: force the top surface of the base plate to fill entirely (e.g., monotonic line) for a smooth finish before adding the next layer. Found a potential fix on the Ultimaker Cura Forum: Separate letters from the top layer by 0.02mm to prevent holes.
Concentric top surface pattern - Is this a bug? - Bambu Lab X1C
2024年6月16日 · workaround is to utilize modifier cube to add the concentric pattern for very top surface, it works just fine, but see the slice that is circled, this causes holes In the print. Thanks
Top Surface Issues - A1/Silk PLA - Bambu Lab Community Forum
2024年1月2日 · I’ve changed ‘Strength/Top Surface Pattern’ to ‘Monotonic’. Also tried ‘Monotonic Line’. I’ve changed the ‘Strength/Advanced/Infill Direction’ to 0, in order to get the top/bottom layers aligned to the part as it’s arranged on the bed.
How to fix or move this line on the Top surface of a print - Bambu …
2023年4月12日 · I’ve tried different Top Surface Pattern like Aligned Rectilinear, Rectilinear, Monotonic Line. Stepping through the print slider on the bottom of Bambuslicer I can’t see… How do I get rid of this line on the top surface?
Improving bottom layer surface quality with PAHT-CF - Bambu Lab …
2023年11月17日 · I started with the Bambu 0.16mm “Optimal” presets for this filament, and a monotronic bottom surface pattern. That had a lot of these ripples. I switched to a concentric bottom pattern and that smoothed the ripples out pretty well, but there’s an area on this surface with some text and the quality around the text was poor.
Are you having issues with terrible top layers? - Bambu Lab …
2024年4月30日 · There are many fixes and patches out there from the community, many ways to try and solve this from using z-hop on retraction in filament settings, changing your surface pattern to monotonic, turning off “reduce infill retraction” and even d...
Top Surface Layer Bambu Studio - Bambu Lab Community Forum
2023年2月10日 · In my experience on low angle top surfaces, close to horizontal, you need to slow down and use more cooling or the layers underneath curl up during printing and ruin the top surface finish. Also switching top surface to concentric may help a bit.