2025年3月14日 · The ignition advance table has been changed. Timing has been retarded in a lot of spots versus the base map. Timing is negative in the two lowest load columns from about 4000rpm to redline. Brap. If you boost control solenoid is hooked up, you'll probably hit around 18-20psi with this rom. Maybe more, I haven't hooked it up bc of fuel ...

Please wait while your request is being verified...

3 天之前 · first step is always ask your tuner for a base file - that way your tuner knows what you're running about with. Based on the spec below the standard file would start and run the car - just unplug the boost solenoid and run wastegate pressure or zero out the min/max duty tables in your rom to keep things in check until your tuner can do their thing.

2025年3月22日 · take your standard map and: set boost target to .7 bar reduce WGDC to 0% min/max pull 2 degrees off the base timing adjust scale for the injectors flatten the fuel map and target a healthy 10.8 AFR remove codes for the cat/other things that you've done

2025年4月1日 · my11 wrx sti stock map: Justsubaruoooo. 1. 512. Sun Jan 22, 2023 4:56 pm. JohnSub2013Sti (Comparison) 2013 Impreza WRX STi AE5L500V stage 1 tune: JohnSub2013Sti. 6. 974. Mon Jan 16, 2023 8:34 pm. JohnSub2013Sti. Looking for a Base map for USDM 08 STi Stage 2: legendracer97. 3. 2572. Mon Nov 07, 2022 3:33 am. Dreinater. …

6 天之前 · It is getting getting rpm when cranked, I checked all possible things that could be causing the car not to start such as timing, crank/camshaft/map sensors etc and they’re working as should. It’s just cranking over like it wants to start but won’t actually fire up so I feel like something within the tune is not right, I’m no expert in ...

2025年3月9日 · In my first map that I edited I set all AVCS control maps to 0. Then (for whatever reason) I reverted those changes thinking that the ECU wouldn't interpret signals coming from it, as the motor that's in there is just using my USDM main harness (connected to the harness that was already on the engine).

2023年7月10日 · I could really use some help with a base map for a 2008 wrx. I have a tractrix cable and ecuflash on my laptop. I have an e-tune for a cobb ap but after my turbo upgrade I didn't know at that time that I couldn't delete codes so now I have a ap tune that just cuts boost so its basically a waste of 250$ and the tuner wants 300$ more to go ...

4 天之前 · I'm having annoying idle RPM oscillations with these maps, my idle is swinging between ~1200 to ~1800 RPMs constantly and car is toggling between CL 8 and OL 10, seems to sometimes calm down when car is in gear, my TPS screw is at stock 0.50v setting, I see that in these maps the TPS voltage y-axis cell uses 0.55v as base voltage, and since "Idle Set …

2025年3月11日 · I'm looking for a base map for my 04 sti, the previous tune I had is locked and i cannot make any adjustments. Also, a lot has changed with mods since it was last dyno'd Looking for something just to get the car started and possibly drive around the block Mods are as followed: FP Red 8cm 750cc DW injectors Torque Solutions top feed rails