The brakes of sizes BE05 to BE2 can be operated with direct DC voltage without brake control, see technical data in chapter "Operating currents" (→ 2 277).

SEW EURODRIVE BE.. brakes are DC-operated electromagnetic disk brakes. The advantages are very short and robust. Furthermore, they are designed to be especially low in noise, especially suited for environments sensitive to noise. The brake coil can be adapted to …

Reinstall new disc or current disc if within tolerance range ... This presentation provided a basic overview of SEW Brakes and should enable you to achieve the following –

You can choose from a range of brake controls for controlling disk brakes with a DC coil, based on the requirements and the operating conditions. All brake controls are fitted as standard with varistors to protect against overvoltage. The brake controls are installed either directly in the terminal box on the motor or in the control cabinet.

SEW-EURODRIVE offers the BE brake repair kit for service work to be performed by customers themselves on brakes of the BE series. It is available in nine versions for sizes BE05 to BE30 and is intended for installation in DR. motors. The repair kit includes all parts required for preventative maintenance and repair of the respective brake type.

The 13740083 is produced by SEW Eurodrive and is described as a SEW 13740083 Brake disc cpl BE2

See Tech Note B-100 for more information on air gap and brake operation. The brake disc requires a minimal thickness for proper operation. If the actual thickness is less than the value shown in the table above, the brake disc should be replaced.

Remove the old brake disc. Using the metric dial-calipers, measure the old brake disc to determine its current thickness. To determine the proper brake disc thickness, please refer to the second chart on page 4 of the Motor and Brakemotor Operating Instructions (Document # …

The SEW brake is an electromagnetic disk brake with a DC coil that is released electri-cally and braked using spring force. The system meets all fundamental safety require-ments: the brake is applied automatically if the power fails.

The double disk brakes are available from August 2015 in sizes BF11/BT11, BF20/BT20 and BF30/BT30 and with a rated braking torque from 2 x 20 Nm up to 2 x 300 Nm.