The EL9410 power supply terminal is used to refresh the E-bus. Data is exchanged between the coupler and the EtherCAT Terminal over the E-bus. Each terminal draws a certain amount of current from the E-bus (see “current consumption E-bus” in the technical data).

EL9410 电源端子模块用于刷新 E-bus。耦合器和 EtherCAT 端子模块之间通过 E-bus 交换数据。每个端子模块都有一定量的 E-bus 电流消耗（参见技术参数中的“E-bus 电流消耗”）。此 E-bus 电流馈入由相关耦合器电源装置提供。当使用了大量端子模块进行配置时，可使用 EL9410...

The ELM9410 power supply terminal is used to increase the E-bus current. The exchange of data between EtherCAT Couplers and the connected EtherCAT Terminals takes place over the E-bus. Each EtherCAT Terminal requires a certain amount of current from the E-bus (see technical data at the respective terminal: “Current consumption E-bus“). This current is fed into the E-bus by the power supply ...

The EL 9410 has a bit width of 2 bits (diagnosis bits for the power contacts voltage [Up] and for the E-Bus voltage [Us], 'Undervoltage') and is displayed in the TwinCAT tree as follows: EL9410 in the TwinCAT tree. If the Up or Us voltage is below 17 V, the corresponding diagnosis bit 'Undervoltage' has TRUE (1) status.

Home. Site pages. My courses. My courses. Courses. 总线IO. 高精度测量IO. EtherCAT及E-bus模块. 概述★. 常见问答★★. EL9xxx系列模块常见问答

Beckhoff Automation EL9410 | 工业模块: 电源; -25÷60°C; IP20; EtherCAT - 产品在Transfer Multisort Elektronik，查看更多我们的产品

The EL 9410 has a bit width of 2 bits (diagnosis bits for the power contacts voltage [Up] and for the E-Bus voltage [Us], 'Undervoltage') and is displayed in the TwinCAT tree as follows:

EL9400, EL9410 - Introduction and Technical Data; © 2023 Beckhoff Automation

The ELX9410 power supply terminal is used to refresh the E-bus. Data is exchanged between EtherCAT Coupler and EtherCAT Terminals over the E-bus. Each terminal draws a certain amount of current from the E-bus (see “current consumption E-bus” in the technical data).

2022年10月26日 · EL9410电源端子用于对E总线进行刷新。耦合器和EtherCAT终端之间通过E总线进行数据交换。每个端子从电气母线中抽取一定量的电流（参见技术数据中的“电流消耗电气母线”）。该电流由相关耦合器的电源单元馈入E总线。