Relatively soft, easy bends can be achieved with everyday general purpose laminate. Lamin-Art® Standard Grade GP48 material is approximately 0.048” thick (1.2mm). Under typical …

2008年7月18日 · Belt-sand the back of the laminate where it will bend around the corners. Clamp the laminate strips to your table before sanding. Make sure nothing is under the strip, so you're …

2012年3月12日 · Standard grade laminate can be bent to a 3" radius before the color coat will crack. For postformed tops a thinner grade material is used and will take a tighter radius. The …

Lamin-Art high-pressure decorative laminate (HPL) can be bent to create curved surfaces. Standard grade material can be cold bent to a 12-inch radius without heat and to a 4-inch …

2018年11月2日 · Use ThruColor™ HPL today for high-end furniture casework, fixtures, revealed edge countertops, chemical resistance, marker board, and more! Welcome to the Panolam …

2018年11月5日 · With its unlimited design capabilities, superior flexibility and the option of being chemically resistant up to 1 inch, ThruColor™ HPL is the choice for high-end furniture …

2020年8月3日 · The other fabrication technique, post-forming, is used when much tighter curves are required, down to a minimum external radius of 5mm. In this process, the HPL is heated in …

Decorpost or Decorative Postforming is a "post-forming board" product consisting of HPL Postform which is attached to the surface of the base panel (HMR), then a postforming …

2024年3月10日 · Bending laminate over bullnose requires precision and patience, but the results are well worth the effort. This guide will walk you through the process, providing clear …