After completing the setup wizard, set the proper shunt current and shunt voltage according to the Shunt current [40] and the Shunt voltage [40] settings. If the battery monitor reads a non-zero …

Communicate wirelessly between products and simplify system installation and enhance performance using the BMV-712 Smart. Find a dealer now.

So, for your use-case to connect to a GX device, the SmartShunt will be fine as long as you don't need the programmable relay of a BMV-712! Another consideration is the location of the shunt …

If you are connecting the Battery Monitor to a Cerbo but you like the idea of a display, then you could consider the BMV-702 instead of the 712. You lose the bluetooth, but will it matter if the …

After completing the setup wizard, set the proper shunt current and shunt voltage according to the Shunt current and the Shunt voltage settings. If the battery monitor reads a non-zero current, …

2020年3月18日 · I'm working with my boat builder to design and install a large Victron lithium battery and electricity management system, based around 4 x 12.8V 300Ah Smart LiFePO4 …

This is the replacement circuit board for the shunt that works for the BMV 702 and 702 black, and for the BMV 712 and 712 black. If you also need the shunt it is sold separately .

2023年1月1日 · These settings have been extensively tested by SOK Battery to ensure the proper function of both the battery and the shunts. Deviating from these settings may lead to …

2017年9月16日 · Victron Energy BMV-712 features an additional input which can be programmed to measure battery temperature (temperature sensor sold separately), midpoint voltage, or …

The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10 m) and battery cable with fuse (2 m); no other components needed.