2008年6月22日 · C5 General - Headlight Assembly Removal C5 - The headlight motor on the passenger side is in failure mode ? the motor continues to run at shut off and makes a noise. The motor on the driver side was replaced a year or so ago.

2015年3月3日 · C5 Tech - Loose Headlight - I was wondering if anyone had a schematic of the headlight assembly. Just after I had a tuner shop install my Night Ryder headlights my left headlight kind of fell off... Long story short I my left headlight is wobbley... not solid like the other one. I discovered they lost the sleeves (You...

2021年12月10日 · Vertical Headlight Aligner On the vertical headlight aligner, there are a few components of note. Here are the parts along with the prices I paid. Headlight Alignment Bar Square Insert ($20 for 4) Two per headlight. Headlight Alignment Bar Round Insert ($10 for 2) One per headlight. Headlight Vertical Adjustment Screw **** (approx $40 each).

2021年12月7日 · C5 General - Corvette C5 headlight upgrade! - So i took my C5 Corvette out for a drive a while ago at night! And since i bought a new SUV for daily driving and has LED headlights i really don't enjoy the Corvette anymore at night, you can barely see anything from these headlights, I even got the Silverstars Ultra in...

2021年1月15日 · and is located on the passenger side below the headlight assembly. Nope... Not weird at all. Pretty common C5 headlight problem. Close bump stops are worn/damaged or missing. When the motor closes the headlight doors the bump stops are contacted causing the current in the motor circuit to begin to rise.

2008年4月5日 · C5 Tech Corvette Tech/Performance: LS1 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace Sponsored by: Community Links

2008年5月3日 · Here's a shot of the assembly: It is held on to the headlight assembly by 2 screws, which are not real easy to get to. I first had to remove the light housing (3 10mm bolts), and then I had to remove the bolts that held the adjusting bracket onto the assembly. The other thing that was a major PITA was getting my old assembly out of that bracket.

2009年11月18日 · Remove the headlight covers and the plastic shroud for the headlights You should be able to see the 4 bolts that hold the entire assembly in place. 2 different sizes..socket wrenches Disconnect the headlight plugs and set aside.

2017年6月10日 · C5 General - Weight of pop up headlights...complete assembly - I've done searches but the numbers seem to be all over the place. Does anybody know the actual weight of a complete headlight system on a C5? Going on a weight loss plan for a track car and trying to get some credible numbers before I start taking stuff...

2010年9月21日 · With lights down, remove two torx screws from the rear of each headlight cover. Remove rubber cover over manual headlight position **** and turn to raise light fully. Remove two screws holding plastic headlight surround bezel, remove bezel. Remove remaining two torx screws holding headlight cover on (one on each side).