The C53 Peter Herbst is a custom collaboration with a drop-point blade and an rounded handle. The first production run of the C53 featured a titanium handle with anodized blue accents, and a 440C blade.

The C53's design exposes a small section of serrations along the bottom-front end of the handle. These tiny teeth serve as a sure-grip resting spot for the forefinger while grasping the knife. Positioned for tip-down carry, a stainless steel clip enables the folder to …

比阳江用的DC53好磨不少，但是韧性通过砍铁测试可以感觉是高一点的。 我自己是磨了薄刃，大约30度刃角，砍铁都是堆和卷，而且都没有超过二次刃刃口的一半。 ***的刃材，只要开刃角度比较小，砍铁都有问题。 硬度高就崩了，韧性好硬度低就卷口了。 还是正常用就好。 大佬们，请问A8钢怎..还不错的一种材料。 比阳江用的DC53好磨不少，但是韧性通过砍铁测试可以感觉是高一点的。 我自己是磨了薄刃，大约30度刃角，砍铁都是堆和卷，而且都没有超过二次刃刃口的 …

This auction is for a RARE 1998 Spyderco C53 Peter Herbst knife. THIS KNIFE HAS SOME MINOR SCRATCHES ON THE HANDLE BUT THE BLADE HAS NEVER BEEN USED. Designed by German knifemaker Peter Herbst, this i...from eBay

Spyderco Knife Rare Spyderco Peter Herbst C53 folding knife. Blade also marked, 440C and Solingen , Germany . Very few of these were produced before Spyderco stopped production of the Titanium handle...from eBay

DC53 steel is a die steel with a hardness of 60-61HRC after heat treatment.provides razor sharp for ultimate precision cutting performance with strong toughness and excellent edge retention. The handle made of Flax has non-slip, corrosion resistance, wear resistance and so on. It can withstand great force without damage and deformation.

P.S. - BONUS KNIFE BUYING INFO! Excellent condition. Tight, No wobble. Good snap. near mint blade! If you’re not happy, I’m not happy.

2022年7月5日 · DC53 steel is a high carbon cold work steel produced by Daido Steel based in Japan, it offers excellent toughness and wears resistance similar to most high-end steel. It is an improvement of D2 steel with the capability of achieving a high hardness of 62-64 HRC. DC53 steel is used in forging, blanking, shearing, and knife making.

We will always make sure you are happy with our service without exception.

Nakiri professional knife, Damascus steel, ironwood dessert handle, 18.5 cm (C55)