Aquatec’s leading Innovation continues with the introduction of three new booster pump Series: the compact front-ported 3300 Series for applications where pump fitment space is limited and water pressure boosting is needed for up to 200 GPD rated RO systems or compact carbonated/still water dispensers, the 5800 Series model 5858-2LM2-B534 in ...

Upgrade your reverse osmosis with the Aquatec CDP-6800 Booster Pump. Efficiently supports up to 50 GPD membranes, features quiet operation, durable design, and included accessories for a reliable water purification experience.

This listing is for a boost pump for water supply to a Reverse Osmosis water system. It is to increase the water supply pressure from 40 psi to 60 psi for RO systems that is 75GPD or smaller. Larger capacity RO should use 8852 pump instead. Also this pump is …

3 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry. Certified to NSF Standard 58. Flow at 80 PSI: ≥ 0.38 LPM. Low voltage (24V) for maximum safety. Quiet operation, less than 52 DBA. Replacement booster pump only. 1/4" quick connect fittings.

The Watts CDP6800 is designed for use in RO systems with flow rates up to 50 gallons per day. Reverse osmosis systems require pressure to work properly. A booster pump is suggested for applications where the feed water pressure is below 40 psi, and where there are high levels of Total Dissolved Solids (TDS) in the wate

The CDP 6800 is intended for membranes rated up to 50 GPD. The pump incorporates a unique new, fully adjustable, by-pass valve which controls the maximum allowable outlet pressure (70 to 110 psi) or a fixed bypass of 70, 90, or 110 psi, regardless of variation in feed water pressure.

Aquatecs original product, and still the global standard in booster pump technology, providing reliable inlet pressure for efficient membrane utilization. These pumps are capable of continuous duty and are effective for recirculation based applications as well.

“CDP” SERIES BOOSTER PUMPS The basic “CDP” pump consists of a pump and transformer unit. Systems may be supplied with other options: e.g. PSW system pressurized shut-off switch, LPP low feed-water-shut-off switch, TLC tank level controller, AFT membrane auto-flush valve or AFR membrane auto-flash/flow restrictor valve. Pumps are completely