1. Easel is a combined CAD / CAM / CNC control web app made by Inventables. You can use it to generate gcode and even send your gcode if you are us...

2. The circle is perfectly sized for the M5 sized threaded inserts with a 6.35mm mounting hole. Just press them into the hole.

3. I sanded an angled edge onto my clamps to give them a lower profile for the part of the clamp that is over the material. This makes it easier to...

1. I originally built my CNC router with several t-slot rails built in for lots of clamping options. I quickly realized they were a pain in the bac...

2. Because it is designed as a spreader and clamp one end already has a hole drilled through it. I just removed the existing screw and replaced wit...

3. Pretty much the same as the origin clamp. Big difference here is instead of the screws I used a captured knob on the near and far side for quick...

4. So far it has been great. Quick and accurate. Another great benefit is I get side clamping because the bar is a little springy. Just set the nea...