2019年3月10日 · For clarity, I am not vary familiar with the CR-10 S5 (which is the 500mm^3 model). AFAIK, all of the CR-10S series use the same control board. Firmware: Changing the firmware requires a little bit of programming knowledge, but it is not terribly difficult. The main thing is getting the settings right in the Configuration.h and Configuration_adv.h.

2019年8月31日 · My PC (Linux Mint) sits right next to my CR10 and I'd like to be able to send files directly to it rather than load the SD card in to the PC, save the file, unplug the SD card, plug it into the CR10 control box, etc etc. I have a USB cable plugged into the CR10 and into a USB hub from my PC but the PC doesn't see the printer.

2019年7月18日 · 3D Printer(s): creality CR10-s5. bed leveling issues. Post by robertcnc » Sun Jul 21, 2019 11:34 pm.

2023年12月30日 · LePaul Reactions: Posts: 4015 Joined: Mon Feb 08, 2016 3:26 am Location: Bangor, Maine USA 3D Printer(s): 24 - Yes I have a problem!

2020年12月23日 · Hi guys. Have a CR10 S5 - printed a few things and had some bed level issues. I have NO IDEA what I changed but now when the Z homes is goes to -65 I click auto home x and y are fine and when it does z - you can see the z value display -65 on the main screen and yes she tries to go that deep.

2019年11月2日 · I have a CR10 S5 and i'm having trouble with the bed temp. The bed temp always reads as 236 degrees even when target is set to 0. I have even unplugged everything from the controller so it is not connected to the printer at all and it still thinks the temp is 236.

2019年7月18日 · 3D Printer(s): creality CR10-s5. Re: Printer seems to mirror parts. Post by robertcnc » Fri Jul 19, 2019 ...

2023年2月14日 · I have 3 CR-10S 3D Printers. (I also have 2 CR-10 S5's and 1 CR-10S Pro v2) I upgraded to Wham Bam Bed Systems and I like them so much, almost all of my machines have them. You remove the glass, adhere the magnetic sheet to the aluminum bed surface.

2018年4月27日 · Roberts_Clif Reactions: Posts: 1440 Joined: Sat Mar 25, 2017 12:17 pm Location: Washington, State USA 3D Printer(s): Hictop 3DP11/12

2022年1月18日 · Hi All, I hope someone can help. I have a Creality CR10S5 and am using Cura. I'm printing a large model that needs minimal support but when I add support in Cura, or even Simplify for that matter, Several layers of support print 1st and then it tries to print the model at the same height where it left of printing support.