So hoping there's a source for the original fans or replacements that can plug into the hotend board. Would it be easier to just buy a complete new hot end assembly and use it for parts? Can folks point me in the right direction? I recently had to replace the smaller fan that's mounted to the hot end, and just went with something cheap from Amazon:

2021年7月6日 · Looked online to find some replacement fans but really couldn’t find anything marked specifically for the CR6. I found a couple on Amazon, that look pretty similar to the blower style fan but it says they’re for the Ender 3. These are the ones in question:

A full description on how to install quiet fans to replace the noisy stock power supply and motherboard fans on the Creality CR6 SE 3D printer.Use the red pr...

Adapts Bondtech LGX Lite V1 and Microswiss all metal hot end plus touch probe and 4020 cooling fan to CR6-SE

Part cooling fan for the Creality CR6 SE that uses the stock blower flan but directs the airflow closer to the nozzle. Uses 40mm, quieter fansIt can w

2021年8月24日 · This is a mod for the new creality CR-6 SE/Max to replace the stock (noisy!) 40 mm part cooling fan with a larger (and quieter) 40x10 mm fan. The supply is 24V. The metal protection will have to be removed to use this.

This provides a worthwhile improvement in noise and fan holding from v1.0, but will take a little longer to print. You.

2021年2月16日 · Part cooling fan for the Creality CR6 SE that uses the stock blower flan but directs the airflow closer to the nozzle.Version for 40mm quiet fans: htt