LYNX 2F will allow the discharge and entrance of large volumes of air during pipe filling and draining and bursts. This version is usually recommended in changes in slope ascending, long ascending segments, dry fire systems, and wherever the air release won’t be required.

The CSA SCF combination wastewater air valve is designed to allow the entrance of large volumes of air in case of negative pressure conditions, caused for example by pump failure, burst, draining, and the discharge of large volumes during filling.

2 function (2F) and 3 function (3F) air valve for air discharge and release and air entrance in sewage lines or waterworks with suspended solids. Specification of the range: Body in ductile iron or steel, fluidized bed epoxy coated, float in stainless steel. Flanged ends DN50-DN200 EN 1092/2, ANSI 150. Design pressure range PN10-PN16.

2024年12月17日 · csa 是一项极为重要的北美认证，除了对所有官方分销商和制造商进行随机登记和测试之外，它还会定期进行现代化改造。 为了最有效地突出这些不同的批准，我们将分解每种测试方法和各种通过或失败.

Air valves are hydromechanical devices with an internal float mechanism designed to release trapped air during filling and operation of a piping system. They also ensure air intake during draining to maintain a positive pressure.

2017年9月21日 · 完备的自动给油系统与滤油装置 (可简易更换)，确保最高缝速可达7,500针/分钟。 具备了二个自动功能 : 自动抬压脚&自动切断面料末端线头。 三个安全保护功能 ：防止切刀误切面料&置布板安全閉合检测，安全防护&压脚安全闭合检测，安全防护。 其它特点同CSA-2614D-M03/M34-2×4。

SCF 2" is a compact high quality single chamber double function combination air valve that evacuates air during pipeline filling, allows release of air pockets from pressurized pipelines, and admits large volume of air in the event of pipe draining/burst, to prevent vacuum and negative pressure conditions.

It is CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres (NEMA 7 & 9), Raintight NEMA 3 (IP54). Weatherproof features include a drain plug and O-ring seal in cover.

The CSA SCF-RFP anti water hammer combination wastewater air valve is designed to allow the entrance of large volumes of air in case of negative pressure conditions, caused for example by pump failure, burst, draining, and the controlled two stages outflow to create some sort of air bag should the air velocity become excessive (likely to produce...

This series of submersible pumps is designed for use in residential or commercial wastewater applications in Class I, Division 1, Group C and D locations. Each pump features an innovative FM/CSA approved motor and electrical enclosure that is designed to reduce the risk of vapor ignition both inside and outside the pump.