These Concrete Surface Profiles were developed by the International Concrete Repair Institute (ICRI), are divided into ten classifications (CSP 1-10) of surface textures based on the average distance from the peaks of the surface to the valleys.

2024年2月5日 · 那要是想降级或者取消卡，是否等这个10% posted后再进行？ 应该来得及吧？ post后一月内statement应该给这个10%了. 突然想起CSP还有这个boost，但是去查看了一下，这么些年似乎一直没有收到过？ 大家收到的话这里会显示吗 Update: 有些人的账户似乎不会显示在这里，查看付年费那个月的账单，会显示point boost的数量.

Use this guide to identify the surface profile of your concrete. CSP 1 being the indicator for a nearly smooth floor and CSP 10 indicative of an extremely rough floor. The range of variation will depend on strength, composition, aggregate and finish. CSP 1-4 not recommended with cement based products.

Architecturally perfect and equally adaptable with a variety of minimalist treatments. Not recommended as exterior paint. Screen colors may differ. Test with samples. Your perfect …

preparation. The guideline includes 10 concrete surface profiles ranging from CS 1 (minimal roughness) to CSP 10 (very rough with amplitude greater than 0.25 in. [6 mm]). Typically, a CSP range should be used and incl such as tensile bond strength (Fig. 7), that may be used for quality control to ensure the suitability and condition of the conc

2021年12月23日 · CSP-10聚羧酸高性能减水剂是基于高分子设计理论研制的新一代高性能减水剂，由多种高分子有机化合物聚合而成，属聚羧酸系接枝共聚物高性能减水剂。

The Tenth Conference of States Parties (CSP10) to the Arms Trade Treaty (ATT) is scheduled to take place as follows: Date: 19 - 23 August 2024 Venue: Centre International de Conférences Genève (CICG), Geneva, Switzerland Time: 10:00-13:00 and 15:00-18:00 (CEST) On 23 May 2024, the notification of CSP10 was circulated: Notification of CSP10

The International Concrete Repair Institute (ICRI) produces 10 distinct concrete profiles formed by various surface preparation methods. Each profile carries a CSP number ranging from CSP 1 (nearly flat) to CSP 10 (very rough; amplitude greater than ¼” [6 mm]).

2023年7月25日 · CSP 10: This level involves using a handheld concrete breaker followed by abrasive blasting, resulting in the highest level of roughness on the CSP scale. Achieving the desired CSP level depends on the project requirements and …

Summarizes the capabilities, operating requirements, and limitations of the various methods used to prepare concrete surfaces for the application of protective sealers, coatings, polymer overlays, and concrete repair. Benchmark profiles are included which provide visual standards for purposes of specification, application, and verification.