以下是一些常见管件的中英文对照表： 弯头：Elbow管帽：Cap管接头：Union管节套：Coupling三通：Tee四通：Cross焊接三通：Welding Tee焊接弯头：Welding Elbow管扇形盘弯头：Pipe Bend焊接伸缩节：Welding Expansi…

fnpt是60度推拔螺纹的内螺纹，mnpt是60度推拔螺纹的外螺纹。 NPT 是一种美国标准60度锥管螺纹，分为一般密封圆柱管螺纹和一般密封圆锥管螺纹，配合方式由“锥/锥”配合，“柱/锥”配合

- FNPT：是Female National Pipe Thread的缩写，表示螺纹连接的一种类型，是一种内螺纹管接口。 - A105：是一种碳钢材料的牌号，表示该材料符合ASTM A105标准要求，通常用于制造管道和阀门的零件。

Seal off unused MPT fittings or pipe run with the female threaded (FPT) cap. Long life with maintenance-free service. Resistant to rust, pit, scale & corrosion.

MGICAP1 Cap, 1 in, FNPT, 150 lb, Malleable Iron, Galvanized. ANSI/ASME B16.3, ASME B16.14, ASTM A197/A197M Equivalent to EN1562, BS 21, DIN 2999, DIN EN 10242 Equivalent to BS 143 and 1256:2000, FM Approved, ISO 7-1, ISO 9001: 2000 Certified, NSF 61, UL/ULC Listed, ASME B1.20.1 (Threads), cULus Listed, FM Approved, Manufacturing Facility is ISO 9001:2008 and ISO 14001, ASME B16.3|cULus Listed ...

'Cap, Pipe Fitting Material Brass, Pipe Size (Fittings) 1/2 In., Fitting Connection Type FNPT, Standards NSF 61 ANNEX G, Fitting Length 59/64 In., Max. Pressure 1200 psi, Outside Dia. 15/16 In., Hex Size 15/16 In., Temp.

Threaded NPT end cap for 3/8 inch female NPT. National Pipe Taper (NPT) NPT is a standardized fitting that is commonly used for joining pipe. Due to the tapered threads (wider diameter at the base of the threads, similar to a trapezoid) the male fitting will tighten the further it is threaded into the female.

IPC 3/4 mm Pipe Size Female National Pipe Taper (FNPT) Thread Pipe Cap. IPC 3/4 mm Pipe Size Female National Pipe Taper (FNPT) Thread Pipe Cap.

Seal off unused MPT fittings or pipe run with the Xirtec Schedule 80 female threaded (FPT) cap. Maximum service temperature up to 200°F (93°C) under pressure with occasional exposure to boiling water (212°F, 100°C). Design stress of CPVC is 2,000psi at 73°F (23°C).

BVV™ FNPT Cap. Best Value Vacs brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are NPT threads (National Pipe Taper) and will compress against other Female/Male NPT threads creating a tighter and tighter connection. All NPT threads require thread sealant ...