2017年7月9日 · Trick i do when bucking logs ,i will do a bore cut ,leaving a strap on both ends top /bottom ,pop a wedge in both open sides then nip the straps ,sometimes will make a small …

2015年12月26日 · As noted, some sets of angles will cut faster, but dull faster (racing chains versus fire wood chains). Some angles will cut better in different species of wood (soft wood …

2016年1月30日 · A lot of discussion on why full-chisel chain cuts faster than semi-chisel chain that is filed / ground at the same angles. Aside from the narrower entry of the sharp 'point' or …

2016年1月30日 · Mounting it on the top of the handle sends the beam into the chain brake handle / flag. The attached photos illustrate these issues on one saw, although, I tried mounting it on …

2020年7月6日 · 1. If I am not going to use the saw again for a few days, I just drain it back into the jug. No need to waste it. I use those disposable, paper funnels from the gas station. 2. I line …

2016年1月16日 · Howdy folks. Recent research into setup of my 066 Red light led me to information saying the gap on the old electronic coil needed to be set at between .006 and …

2016年1月17日 · I use a Granberg Jig (following @Philbert's suggestion), and time to set it up for the chain. 1 sometimes 2 normal swipes does it. Dull/damaged chain takes a hard swipe with …

2021年4月24日 · Obviously you've never ran the chain from the ebay seller "lawnmowerpartsworld" branded as "Saw Chain Expert". I tried 4 loops of it and every one of …

2020年12月8日 · Looking for info here- Thinking of a 3/8 chain setup for my MS261. My concern is the small clutch drum bearing. A question for those of you that have done this change, has …

2022年4月3日 · Some say the 025 and the 250 have always been tough to pull start. And, Stihl recognized this and made the 251C with and easy-start option that has a spring assist. It …