Engine Control Module stored a Code which influences other Control Modules Functionality. To clear this Fault Code you will need to correct the Problem in the Engine Control Module first.

2003年6月21日 · It means the code is stored in the engine control module so when checking fault go into engine electronics.

2016年6月29日 · VAG Error Code: 01314 Fault Location: Engine Control Module (ECM) - Check Diagnostic Trouble Code (DTC) Memory - Control Difference Possible Cause: Fault (s) stored in Engine Control Module (ECM). Possible Solutions: Check Engine Control Module (ECM) for fault codes. Special Notes:

2024年12月22日 · After completing the 1.8T install, my first VCDS scan yielded two trouble codes in Address 17 (Instruments), i.e., ECU - Not Currently Testable (01177), and ECM - No Communication (1314) .. Ross-Tech says these errors may be present if the ECU was re-flashed ..

2015年8月31日 · What else can I do troubleshoot these issues? I have tried to clear all codes and start the car and get nothing. I feel the issue is related to the three long beeps and brake light flashing, although the electronic brake is not engaged …

2015年6月7日 · 01314 - Engine Control Module 013 - Check DTC Memory - This sounds like a case where the tuner has disabled a particular fault codes (s) from flagging within the ECM, yet the message still makes it to the ABS. - Just a hypothesis, I have seen something similar with a transmission controller fault and a tuned ECM on a 2001 Allroad.

2004年6月25日 · ECM Fault Code 01314, what does it mean? I've been having a recurring problem with my car having intermittent laggy throttle response. With the MAF plugged in I get the MAF signal too low code and have occassional stalls. With it unplugged, I still have erratic throttle response, but no stalls.

2015年8月29日 · I have tried to clear all codes and start the car and get nothing. I feel the issue is related to the three long beeps and brake light flashing, although the electronic brake is not engaged at all, I rarely use it.

2007年3月8日 · It tells me you're using an old version of VAG-COM, or something else. The 01314 means the ABS controller is having trouble talking to the ECM. Text should be "Engine control module - No communication"

2022年7月27日 · Most recently it's just been the TCM that is recording no communication when this issue is reproduced. I've gone through and verified all fuses are good, battery is fully charged (done on July 24th, 2024) after putting it on a charger, and moving the ECM and TCM wires around to see if the issue can be reproduced by that.