2015年2月5日 · First, the minimum recommended distance between any two anchors is 10x the anchor diameter (2 1/2 inches for 1/4 inch anchors), at the risk of weakening the holding strength of each.

2023年8月13日 · Tapcon screws are self-tapping concrete anchor screws that are designed to provide a secure anchor point in masonry surfaces like concrete or brick. They have a unique thread pattern and sharp cutting edges which allow it to be driven straight into the surface without needing any pre-drilling.

2016年2月18日 · From the best I've found, the recomendation is to go at least 1" into the concrete, and for tapcons, people tend to recomend the 1/4 vs 3/16". Looking around it seems like my options are either 1/4" x 2-3/4" Tapcons, or 2.5"/3" Ramset nails. 2.5" on the ramset nails would be just cutting it on the 1" minimum, so I was thinking maybe the 3"?

2001年3月7日 · If you recommend Tapcons, what is the process of attaching a 2X4 to a cement floor–do you hammer drill through the 2X4? Dumb questions, I know, but consider the source. we use both... my idea is you use a ramset wherever you can .. …

2023年11月25日 · As I walk you step-by-step through the process of installing concrete anchors, I’ll give you some tips and tricks along the way. I’ll also cover what to do if you run into trouble; specifically, what you can do if you over-torque when mounting the anchor and strip out the hole.

2009年7月31日 · Concrete screws are the generic name for a specially manufactured screw that taps threads into concrete, brick or block. The threads are hardened to cut the base material. The threads are created with a special design that allows for removal of the dust that is created while cutting the threads.

2020年12月21日 · I understand it’s recommended to fasten the Dricore or OSB through the insulation with Tapcon screw sto the slab to make for a secure flooring substrate. However, I am concerned that the Tapcons will fully penetrate the slab and create moisture issues.

2013年6月30日 · No way is a Tap-Con going to snap off. I also have used hundreds for anything from setting walls on concrete slabs, installing toilets, installing outside faucets, and dozens of other jobs and yet to have one snap off. A plastic anchor in a concrete slab will just be able to be pulled right up out of the floor.

Installing a freestanding bath tap on a concrete floor can be a bit tricky, especially considering the risk of damaging the floor. However, with careful planning and the right technique, you can successfully complete this task. This guide will walk you through each step, ensuring a smooth installation process.

2023年10月17日 · I am renovating a basement laundry room into a bathroom and would like to install a freestanding tub. How would people approach running the supply lines from the wall to a floor mount tap if I can't cut into the concrete floor? Floor is heated so don't want to risk hitting a water line in the floor. Thanks