To connect to your Victron product, over Bluetooth, always connect from within VictronConnect. Do not connect from the phone's system menu because VictronConnect will not find your Victron product. Here is how to connect: Enable the Bluetooth on your phone. On a phone or tablet, pull down the screen, or tap the refresh button to initiate a scan.

Apr 19, 2020 · You connect your charger negative to the "Loads and Chargers" side of the BMV shunt, just like every other system negative. Yes, you can leave the charger connected and plugged in whilst in storage.

Mount the Blue Smart IP22 Charger vertically (with terminals facing down) on a non-flammable substrate; secure using the 4 mounting holes on the base. Ensure there is at least 10cm of clearance below and above the charger for airflow/cooling.

1. Connect DC cables to the charger and then the battery or batteries; ensure that there is a good electrical connection and keep the terminals away from any surrounding objects that could cause a short circuit. 2. Connect the AC power cable to a mains power outlet; the TEST LED will be illuminated or blink when the Blue Smart Charger is ...

Hi, how do I connect the Blue Smart IP65 Charger to a built in and connected car battery? Plus to battery plus and minus to to car body minus or both , plus and minus direct to the battery? Thx. .... forgot to say, that the connection should be done with eyelet connector and extension cable, to have quick access without opening the hood.

Quick user guide A. Connect the charger to the battery. B. Connect the charger to the wall socket. The TEST LED will indicate that the mains cable is connected to the wall socket. All charge status LEDs will flash in case of reverse polarity connection, short-circuit or if a 12V charger is connected to a 24V battery.

Quick user guide A. Connect the charger to the battery or batteries (see figure 1). B. Connect the charger to the wall socket. The BULK LED will indicate that the mains cable is connected to the wall socket. C.

1. Connect DC cables to the charger and then the battery or batteries; ensure that there is a good electrical connection and keep the terminals away from any surrounding objects that could cause a short circuit. 2. Connect the AC power cable to a mains power outlet; the the POWER (green) LED will be illuminated when the Blue Smart Charger is ...

To connect the battery charger to your battery, first ensure that the charger is not connected to the mains power. Then, connect the red clamp of the charger's output cable to the positive terminal of the battery and the black clamp to the negative terminal. Ensure a secure and proper connection to avoid any sparks or accidental polarity reversal.

In this video, I connect the Victron Energy Blue IP22 12/30 (1) Bluetooth Smart Charger up to my VoltaX 100ah LifePO4 battery. I've got the Australian/New Zealand model, but I believe...