
Self Help iEnabler - Cape Peninsula University of Technology
CAPE PENINSULA UNIVERSITY OF TECHNOLOGY. Sunday, 23rd March 2025. Registered Users: Login Credentials
ABSTRACT: An interpretation of piezocone (CPTU) data of a sedimentary soil and two distinct residual soil profiles from Brazil and Portugal are presented. The main objective is to show the differences in the interpretation of these soil types.
Welcome to e-GP
CPTU reaches at the new height --Signing MoU for e-Payment through Payment Gateway in the e-GP System
Stress-Based CPTu Cyclic Liquefaction Triggering Procedures ...
2025年1月24日 · Using similar input data to most simplified cone penetration test with pore water pressure measurement based (CPTu-based) liquefaction triggering models, screening procedures have been proposed to estimate the in situ state parameter, providing an index with a strong correlation to its cyclic resistance (at least theoretically).
• CPTu dissipation tests provide a profile of equilibrium piezometric pressures (u0) – Identify general flow regime • No (vertical) flow (Hydrostatic conditions) • Upward (vertical) flow (Artesian conditions) • Downward (vertical) flow – Effective even if filter is not 100% saturated – Recommend at least one per CPT to confirm
基于CPTU测试的高速公路拓宽复合地基沉降计算研究
依托淮安至江都高速公路拓宽工程,对新老路地基进行CPTU测试和旁压试验,根据旁压试验测试得出土体的切线模型;对拓宽路基进行沉降监测,通过路基沉降反算出路基土层压缩模量,研究了CPTU测试参数计算复合地基沉降的计算模型,并与传统的经验关系模型进行对比分析。 结果表明:提出的复合地基沉降计算模型能准确计算路基的沉降,计算结果与实测沉降接近,提出的计算模型明显优于传统经验关系模型。 在复合地基沉降计算中建议使用本文提出的计算模型。 The …
孔压静力触探(CPTU)测试成果影响因素及原始数据修正方法探讨
孔压静力触探(cptu)是20世纪80年代在国际上兴起的新型原位测试技术,因其诸多优点,目前在欧美诸国已得到广泛应用。 由于探头规格、技术标准和操作程序的差异,影响CPTU测试成果的因素很多,而且其影响程度也各不相同。
基于CPTU的土分类方法在港珠澳大桥中的应用 - cgejournal.com
摘要: 由孔压静力触探测试(cptu)所提供的锥尖阻力、侧壁摩阻力和孔隙水压力等参数能直观地反映地下土类的变化,目前,国内外基于cptu的土类划分发展出了许多不同的方法,这些方法对于国内工程场地土类划分的有效性尚未得到验证。本研究在港珠澳大桥主体 ...
基于位错理论的饱和土渗流特性CPTU评价研究 - cgejournal.com
孔压静力触探(cptu)测试数据通常用于土层划分和岩土工程设计参数评价。 国际上CPTU测试技术的最新进展之一在于采用测得的锥尖阻力、侧壁摩阻力和孔隙水压力快速、连续地获得饱和土的渗透系数,以避免孔压消散试验费时的缺点。
基于现代CPTU测试的桩基承力确定方法研究 刘松玉_百度文库
国外对cptu技术进行了系统的理论研 究,对于不排水的粘土和完全排水的砂 土,采用四种方法:承载力理论、孔穴 扩张理论、稳态变形理论和有限元等数 值分析以及标定槽试验。
- 某些结果已被删除