2015年7月15日 · Yes, I have always just turned it over and reused, but this time when I did that, I screwed the plug in finger tight and when I torqued it to 42 Nm, that was achieved very quickly, …

2007年12月17日 · just an fyi the crush washer for the oil drain plug is the same crush washer for the transmission drain plug. The aluminum washers for the front diff and transfer case are also …

2011年11月6日 · The original crush washer had the smaller side towards the drain plug head. I always change my oil for the first time at about 1000 miles then go to regular 4k intervals. With …

2018年11月29日 · Ok, so I have to ask, what is the reason reusing a crush washer is bad? I have reused a few (some of those multiple times even) with never a muzzle device coming loose. …

2013年2月20日 · The method was to hand tighten the comp/FH and check the location. If it required from 1/4 to 3/4 turn to get it timed then you were good to wrench it on. If not try …

2012年1月16日 · Crush Washer (I can see where it would crush)- ie on engine oil plug and transmission drain plug - Nissan part #11026-01M02 - 12mm copper Gasket Washer (It is flat …

2018年2月19日 · T-Case Fill Plug Washer: 11026-1CA0A T-Case Fill Plug Torque: 26 ft-lbs (need FSM reference) T-Case Drain Plug Washer: 11026-1CA0A T-Case Drain Plug Torque: 26 ft …

2022年8月9日 · Crush Washer, 2007 GSA Jump to Latest 1.2K views 6 replies 3 participants last post by Kudzu Aug 9, 2022

2024年9月2日 · Its not uncommon for the crush washer to be crushed to a point where its smushed in under the threads of the plug. Pry it up with a screwdriver and/or pliers and cut it …

2011年11月3日 · 11026-01M02 Engine Oil drain plug washer (crush washer) 11026-01M02 Transmission drain plug washer (crush washer - same an engine oil) 11026-4N200 Transfer …