2009年6月22日 · That CRX was boosted and had a total **** job done on it, so I went ahead and pulled the motor from that and used it as my starting project, I got rid of all the turbo components since they were **** anyway, FMU, downpipe with different size pipe every 5 inches LOL, and an oil starved turbo, the intercooler was tiny, and the manifold was a cast ...

11/17/09 Upadated blown engine page four. 12/11/09 Updated built Engine tuned 5/11/11 Updated restore/upgrades 1/18/14 Upgrading my turbo setup to obtain more HP! Goal 200whp :mrgreen: HOPE THIS IS IN THE CORRECT THREAD Parts list -still aquiring Parts = * -Stock sohc zc, Runs strong...

2009年3月23日 · Hey, so I'm going to be adding a turbo kit to my 1989 crx si, which currently has I, H,E, as well as a Webb cam, new suspension, rear discs, etc. This will be the first huge project I've done on this car, and I want to do it right.

2024年10月8日 · Hello CRX Community! 30+ year CRX/Honda enthusiast here, starting with my first car—a red ’86 CRX Si in 1994. I’ve owned more than a dozen since, and now I’m deep into my latest 1988 CRX Si Turbo build & wanted to share my progress. ** Follow IG: 88crxsi for new content, updates.

2012年8月27日 · Hey guys. As u can see im brand new here and would like to get some help/info/input on my upcoming build. Been doing a lot of research and reading and I basically have things planned out. It will be a daily killer driver for a while with occasional tracking. I'm shooting for a goal of 300hp...

2023年7月7日 · If you didn't see my previous post. I bought my second CRX this year - a 89 Si that was a boosted car by previous owner. At some point, the motor and turbo got pulled... LSS, i ended up with 2 more d16Z6's and a turbo, manifold and a down pipe. I brought the car home and put it in storage, but before I did I took some info down on the turbo.

2011年7月24日 · Here is a few pictures of my '90 CRX, it has a LS swap with a GSR cable tranny (rare), Skunk2 intake manifold, and a few other mod's. I always run NOS but decide to go turbo. I will upload the pics as soon as I figure how to do it. :rolleyes1: lol

2024年3月28日 · Hey yall. I got a 1987 crx si that im planning on engine swapping and eventually getting a turbo in there. Im planning on getting a d16a1 in there as it can be bolted in with cheep ingetra parts. I've been doing my research to see if there were any manufactured turbo kits for my car, but I can only find kits for the 88-91 body.

2014年1月24日 · 1 TINY turbo, and 1 med turbo. is all you need, because you would be better off doing a sequential. tiny (sized to idle-400 RPM) with a PWM boost solenoid, and 50MM bypassWG, to a turbo sized from say 4000-redline, if you have a turbo builder working with you, the hard part is the welding. (and wallet)

2009年4月6日 · Traction is already going to be at a premium. If you use the 4.4 with the 1.034 4th gear, you might also avoid going into 5th at the drag strip. My current setup is a turbo B16A that made 306 whp, going through a stock JDM YS1 trans. With the 4.4 and the 1.107 4th gear, I was hitting the rev limiter in 4th gear at the end of the track.