2015年11月26日 · d6c winch was created by 68dually Hey guys, I haven't posted anything for sometime now but I have a question about winches. I would like to get a winch for my late model d6c 10k.

2017年2月16日 · D6C Winch Question was created by vpracer I have a 10K D6C with hyster winch. This weekend went to pull out a stuck tractor and the winch reversed out fine but would not spool in. Sounded like gears grinding when I went to engage.

2022年8月3日 · I have a D6C (powershift) that had a winch on it at one point in time, the rear end is bare right now, but the controls are still there and I see that the pump is hanging up in there still (disconnected of course). Has anyone put a ripper on the back of one of these machines and if so what did you use for controls and a pump ?

2008年4月2日 · Yes, the winch drive on the powershift is a constant running pto and relys on hydraulic pump, control valve and hydraulic operated clutches to disengage the drive in order to shift the winch to forward, reverse, neautral and inching if it has that feature. Also has hydraulic assist braking which you read on the gage.

2017年1月10日 · Replied by Old Magnet on topic D6 winch compatibility Not the same for the D6B. If it had the original starter and straight tooth flywheel ring gear you need an original 8H1913 40MT clockwise starter plus the 1M0023 adapter or a later 42MT starter with the same adapter and straight 11 tooth drive.

2008年4月2日 · Yes, the winch drive on the powershift is a constant running pto and relys on hydraulic pump, control valve and hydraulic operated clutches to disengage the drive in order to shift the winch to forward, reverse, neautral and inching if it has that feature. Also has hydraulic assist braking which you read on the gage.

2018年10月11日 · ACMOC Membership Benefits. FREE quarterly magazine filled with content about antique Caterpillar machines; FREE classified listings

2011年11月25日 · ACMOC. Antique Caterpillar Machinery Owners Club. 1115 Madison St NE # 1117 Salem, OR 97301. [email protected]

2018年11月23日 · I’ve owned a D6C with a 3306 and I currently own a D6D also with a 3306 engine. The 3306 is held in high regards among Cat owners. I believe in the long run your investment in a 3306 powered D6C is better protected and a will offer better resale value.

2012年6月4日 · Specs for a D6D pump are 11gpm. Runs at 230 psi. winch relief valve is in the winch control valve on LH side of case. Series 3 30 was original winch oil spec; i just use 30 wgt TDT oil for mine. Some people run atf, but this was usually in the later 'W' series winchs with paper clutch plates.