2015年12月29日 · The table top is 3/4 Phenolic faced plywood supported by a double skirt of 3/4 hardwood. One skirt of oak 3/4 wide by 1 3/4" deep under the edge of the plywood and then a wrapper of oak 3/4×2 1/2" around the outside.

2018年1月4日 · Right now, I'm designing a multi box plywood construction layout with a table top that's either: 2 sheets of MDF with a plastic laminate top surface and either laminate or solid hardwood edge banding OR Plywood and MDF with HDF …

2013年4月30日 · Just curious if any of the ingenious innovators here have ever tried (and/or succeeded) in creating a "replacement" top for their portable table saw - similar, perhaps, to the Rousseau PortaMax Jr 2600 (links + image below). I inquired about the construction of the product from Rousseau, and...

2020年5月2日 · These lovely DIY things that we love to hate. When I bought my allotment / tiny house, I got not just one, but two of them with the house and felt that they had to be saved and used as outdoor workshop there, a cordless workshop, with drill, circular saw and router, since it …

2021年4月24日 · I have a Dewalt DWE7492 table saw (aluminum table) and it has a dip in the middle - the lowest spot being right at the blade and slightly less than 0.02" deep. I started sanding off the edges hoping to eliminate the dip as much as I can, working like this: a)mark the high spots front-to-back using a straight edge and a feeler gauge

2018年4月29日 · That way once it comes off the roller stand, more wood is on the saw than off and it doesn't want to drop. When needed it's possible to step in front of the stand (between the saw and stand). So it's not all that much in the way. I still cut my sheet goods down with a circular saw. A full size sheet of 3/4" anything is too big and heavy for me.

2018年9月2日 · No saw modifications are involved - the base pinches the tube frame with four 1/4" bolts, and the top rests on that base. The level of the top is adjustable with the wrench, and the whole thing can be detached in a few minutes. The triangular hole in the right side of extension table provides access to the lever that releases riving knife.

2013年6月30日 · In the fight against dust in my small garage shop, I have a 2HP Grizzly dust collector and I just finished installing a Rikon air filtration system. I have a Ridgid 4512 10" table saw that I would like to install an overhead boom arm dust collector onto but I cannot seem to find either an after-market offering or a DIY version for this model saw.

2013年3月27日 · Spent the day working on a better way to hold down my workpieces to the slider. Ive grown tired of constantly fiddling with the standard hold down toggle clamp. I ran across the pneumatic clamps felder sells but at $870 each i cannot justify that for a clamp. I …

2019年6月13日 · That stuff I usually do a double thick, and just put it on the edge, inset into the top. You can go really heavy weight and make your top 3 sheets thick, and use the bottom 2 to screw into, and the top just surrounds the track making it flush. Or I suppose you could route, or dado it out. Whatever works easiest for you.