2008年5月28日 · the ZC engine that fits in the 3g Civic is the JDM "browntop" DOHC ZC that came from the factory in the JDM 3g Civic Si and JDM 1g CRX Si - that is not the same engine that fits the 88-91 Civic/CRX - the USDM 86-87 Integra D16A1 is basically the same as the JDM "browntop" DOHC ZC, except it is lower compression and has a lot milder camshafts

2008年5月28日 · Dohc ZC swap into 1989 HF 5 speed questions/ verifications. J3crxhf; Mar 18, 2022; 8 2.8K Mar 28, 2022. by ...

2012年4月11日 · On this DOHC ZC people always overtight the 10mm cam cap bolts and break them (9 lbs/ft) -Set valve lash, don't forget or the engine will be toast. -Then install tensioner and then the timing belt (make sure the block it at TDC (you can use the mark on crank gear and oil pump) and that the cam gears are at TDC (marks lined up with head).

2007年10月16日 · ZC (similar to D15Z4, D16A1, D16A3, D16A6, D16A8 and D16A9 engines) A few D-series variants are labelled "ZC" (usually JDM), but they are not truly a different series. There are both SOHC and DOHC ZC engines. The SOHC ZC is similar to the D15Z4 and D16A6 engine, and the DOHC ZC is similar to the D16A1, D16A3, D16A8 and D16A9 engines.

2010年8月31日 · OBD1 DOHC ZC engines came in 92-95 JDM cars - they are no older than a D16Z6, which came in 92-95 USDM cars, and are a lot better engine - most of the ZCs imported from Japan are in a lot better condition than most of the used D16Z6 engines - the DOHC ZCs start out with about 10whp more than a D16Z6 - a lot of people believe the Z6 and Y8 are the way to go because they are "VTEC" - another myth

2011年2月2日 · 75.5 bore, stroke 90, rod length 137mm, 29.5 compression height, (43.8 head cc's in zc), -2.6cc dome dish volume. That setup with a .037" headgasket, without head or block milling, puts a DOHC zc at 8.62:1 compression ratio. Now the only problem is, is that they are $566 a set.. Bleh a little steep for pistons!!!

2012年10月7日 · DOHC ZC timing Jump to Latest 16K views 8 replies 4 participants last post by ZCHONDACRX91 Oct 8, 2012

2023年12月24日 · Dohc zc specs,mods, parts list From tuning to transmissions, replacement parts and even information on unusual swaps, if it's a ZC, this article touches on it.collected from all over the net. if there is anything wrong just let me know.

2007年9月6日 · there are a few differences, other than the camshafts - on the timing belt end of the head, the bolt holes for attaching the inner timing belt cover are in different locations - on the opposite end of the head where the distributor and cylinder sensor bolt on, the 86-87 D16A1 is not like the 88-89 D16A1 - the 88-91 DOHC ZC is like the 88 …

2007年6月20日 · my DOHC ZC - 133.73whp and 108.48wtq (tuned on a Dynojet) Save Share Reply Quote Like