Jun 5, 2017 · DCT RESET Start the engine. Select N Stop the engine. While pressing D, switch the ignition on, wait until the yellow ‘engine' symbol goes out on the dash, then release D Press in fast sequence: DDNDN On the dash, the letters D and S should appear together Restart engine, allow it to idle. After a few seconds, the letters D and S should go out. Job done!

Jun 28, 2017 · The downside to all this is that you can get into initialisation mode regardless (up to and including the DDNDN sequence), at which point it will just sit there flashing the bar that will not disappear. The oil will then heat up past the range the box likes and you will have time to have a cuppa or two while it cools down naturally.

Aug 23, 2021 · First time poster. Thanks to all who have contributed to the DCT reset discussion. I have a 2021 AT base DCT with 5k miles. Since driving away from the dealer, the DCT was not super smooth shifting up or down, D or S, (I, II, or III). I came across this forum topic and decided to give the DCT reset a try. Tried the aforementioned DDNDN process several times before I heard the gearbox index ...

Apr 24, 2019 · That is not the procedure on the Africa Twin. The engine light goes out just as quickly as it normally would in a normal ignition start up, even if you have your finger on the D-key. But carry on anyway. After you do the DDNDN at the right pace, things start happening. I don't know why Honda don't alter the instructions.

Jun 22, 2017 · Well I did the DDNDN reset procedure this afternoon and took the bike out for a ride in traffic - it certainly seems better than it did on Sunday in heavy traffic in Dublin where it felt pretty meh. I think the problem is that after about 1500 or …

Oct 14, 2018 · I found that the noise got much quieter and the shifting a lot smoother after I do a gear reset. Feels like a new bike. DCT RESET Start the engine. Select N. Stop the engine. While pressing D, switch the ignition on, wait until the yellow 'engine' symbol goes out on the dash, then release D. Press in fast sequence: DDNDN.

Nov 17, 2019 · Try this before going to the honda service: DCT RESET 1. Start the engine. 2. Select N. 3. Stop the engine. 4. While pressing D, switch the ignition on, wait until the yellow 'engine' symbol goes out on the dash, then release D. 5. Press in fast sequence: DDNDN. 6. On the dash, the letters D and S should appear together. 7. Restart engine, allow it to idle.

Dec 25, 2017 · The slightest throttle movement caused a disproportionate leap ahead and I could not stop the bike from creeping forward while stopped in traffic. After doing the reset all those unpleasant things stopped. I do have a couple of notes though. After the MIL light goes off---go IMMEDIATELY to the DDNDN sequence.

Jun 28, 2017 · Has anybody been stuck in initialization mode? I let it cool quite a bit and tried to preform the reset to get out of it with no luck. It let me ride with it stuck but the shifting was still really jumpy. I can't change to drive or sport it just shows them both on the screen highlighted.

Sep 22, 2019 · Start the engine. Select N Stop the engine. While pressing D, switch the ignition on, wait until the yellow ‘engine' symbol goes out on the dash, then release D Press in fast sequence: DDNDN On the dash, the letters D and S should appear together Restart engine, allow it to idle. After a few seconds, the letters D and S should go out.