DIN 940 - Studs, with engagement length 2,5 x d Current norm: DIN 940. Send Inquiry. Buy DIN 940; Technical information; 3D model; Inquiries; Overstock; Company City Country Company profile; TOP LUSAVOUGA - Hardware and Tools: Cacia: Portugal: See Detail: TOP Lectoe Engineering Fasteners Ltd: Wolverhampton: United Kingdom:

2025年2月20日 · DIN 940:2010的标准全文信息,本标准规定了尺寸为M4～M24粗牙螺纹和M8×1～M24×2细牙螺纹螺柱，螺柱端部螺纹长度约为2.5d，A级产品的尺寸和交货技术条件。该标准主要用于低强度的轻金属。This standard specifies dimensions and technical delivery

材质：不锈钢；等级：A2-70、A2-80、A4-70、A4-80 表面处理：不锈钢本色、钝化 规格：M5-M68，长度可任意加长，支持非标订做。

DIN 940-1995 粗杆双头栓 b1=2.5d规格表,DIN 940-1995 粗杆双头栓 b1=2.5d图纸及3D产品选型,紧固云找标准提供齐全的紧固件标准

[DIN] DIN 940 - 1983: Studs with a Length of Engagement Equal to About 2.5d View Suppliers : 4 [DIN] DIN 949 (-2) - 1995: Studs with Metric Interference Thread MFS - Part 2: Lengths of Engagement ≈ 2.5 d (Type B) View Suppliers : 5 [DIN] DIN 940 - 2010: Studs with a Length of Engagement Equal to About 2.5d

注：技术数据仅供参考，请以官方原件为准！ 材质：不锈钢；等级：A2-70、A2-80、A4-70、A4-80 表面处理：不锈钢本色、钝化 规格：M5-M68，长度可任意加长，支持非标订做。

2025年2月12日 · 本标准规定了尺寸为M4～M24粗牙螺纹和M8×1～M24×2细牙螺纹螺柱，螺柱端部螺纹长度约为2.5d，A级产品的尺寸和交货技术条件。 该标准主要用于低强度的轻金属。 DIN 835 双头螺栓 旋入端 （约）2d DIN 835:1972 双头螺栓 旋入端 （约）2d DIN 939:1995 双头螺栓. 旋入端 （约）1.25d DIN 835:1995 双头螺栓. 旋入端 （约）2d DIN 938:2012 双头螺栓. 旋入端 （约）1d. 分析测试百科网标准频道是为分析测试行业提供标准信息检索而建立，方便分析测 …

DIN 940:1995的标准全文信息,本文件包含螺柱、金属端头 2.5 d 的尺寸和技术要求，并指定了它们的名称。 This document contains dimensional and technical requirements of studs, metal end 2,5 d and specifies

2010年7月1日 · This standard specifies dimensions and technical delivery conditions for sizes M4 to M24 coarse pitch thread and M8 × 1 to M24 × 2 fine pitch thread studs, with a thread length at the stud end of approximately 2,5 d, of product grade A. Studs complying with this standard are intended for use mainly in light metals of low strength.

This standard defines dimensions, technical delivery conditions and the designation of studs with a thread length at the metal end of approximately 2,5d of product grade A for coarse thread from M4 to M24 and fine pitch thread from M8×1 to M24×2. Studs according to this standard are primarily used for screwing into aluminium alloys.