It can be used to send DyNet1 and DyNet2 packets, both logical and physical. It can also be used to send 0x6c messages which are great for debugging. With this command you can send …

User Temperature setpoint, 16 bit two’s complement in 0.25°C steps. Data Lo: 8 bit Fade Time in 20mS increments. The Base Link Area (BLA) acts like an Area 0 for all channels that have that …

Port 1 uses the DyNet protocol to communicate with the Dynalite system, using two addressing methods: Physical addressing is mainly used during the testing and commissioning stage to …

DyNet is the communications network and communications protocol for Dynalite lighting automation and building automation. It is now part of Signify. The network runs on a 4-twisted …

Philips Dynalite’s range of integration devices and network gateways, allows the DyNet system to be configured to work in conjunction with other systems such as blinds, audio-visual, …

DyNet data cable is specifically designed for high reliability RS-485 network wiring. In addition to a twisted pair for RS-485 data, conductors are provided to supply DC power to network […]

在上位机配置界面菜单栏选择“新建驱动”选项， 如下图. 在弹出来的窗口中选择“DyNet”，如下图. 添加好驱动后，选择新建通道，DyNet 是灯光控制系统上用的协议，主要是以 RS485 串口通 …

The Dynalite network uses a trunk and spur topology. Trunks can be RS-485 or Ethernet. Spurs are RS-485 only. Each spur is connected to a network gateway that connects to the trunk …

Philips Dynalite (previously Dynalite) is a lighting control and automation system developed in Sydney, Australia by John Gunton in 1987. In 2009, Dynalite was acquired by Philips Lighting, …

The Philips Dynalite DDNG485 is a flexible network communications bridge designed for RS-485 networks. The two opto-isolated RS-485 ports enable the DDNG485 to implement a trunk and …