What's new. New posts. Menu

2015年1月7日 · E6000 is another instance of a name that originally applied to one product, and that has now been applied to a variety of different products intended for different applications. My experience with E6000 is limited to the contact cement (liquid) version where you apply the adhesive to both surfaces, and allow them to become tacky before pressing ...

2015年11月26日 · The major difference is that E6000 sets by evaporation and epoxy sets thru a chemical process. If gluing raw wood I guess the solvents in E6000 could migrate into the wood but it may take a long time to fully cure.

2005年2月6日 · Not an adhesive for gluing woods together or anything of that nature. If you read all the hype about it and its tensile strength you would say it a is a great product with tremendous adhering power. My opinion it is a craft makers glue for beading and small craft projects because it does dry quickly and as I said dries clear.

2018年4月18日 · Living in the south we have a wee bit of humidity. Its a chilly rainy day and i turn in the garage where the wife is also doing laundry making the humidity even higher. It is taking 20 to 30 minutes before layers and the thicker i go the longer it …

2025年2月5日 · It stands ~11" tall and is 5" at the base. I drilled a hole through the piece and ran some miniature fairy lights up into the insulator with the battery pack in a recess in the bottom. It has a spray lacquer finish on it and the insulator is glued to the top using E6000.

2025年2月12日 · General penturning discussions not specifically addressed in one of the specialty forums.

2016年8月13日 · The title says it all. I've tinted other finishes but never tried it with CA. Has anybody tinted CA glue with dye or other mediums? It's liquid acrylic, and true acrylic blanks are colored, so why not plain CA?

2012年12月21日 · Weldon #4 is what I use. It is not an adhesive but rather a solvent weld. It melts the material together and the joint is as strong as the material itself. It is mostly methylene chloride which is the same stuff in a lot of the harsh paint strippers. However, paint strippers will not work in its place, I have tried!

2022年12月17日 · 4. Score/sand or wipe/clean the tube before using. This should be done regardless of the kind of adhesive used. I use epoxy about 75% of the time and polyurethane expanding adhesive about 25% (give or take a little).