2015年6月23日 · It's stored in CAS and FRM (NFRM if you have FRM2 or 3). Just copy FA from your FRM to the new CAS. Then default code the CAS. The basic process is: Load NCS with a factory coding profile (non manipulation). Choose FRM or NFRM instead of CAS. Execute job FA WRITE on the CAS module. Execute job SG_CODIEREN on CAS module.

2024年8月13日 · BMW Multitool CAS 2/3/3+ Key Programing DIY Warning: This is a very advanced DIY that involves working with a sensitive electronic system. Although this is the safest tool for working on our CAS system professional locksmiths have bricked cars with this.

2022年6月5日 · Starting Issues to CAS Issues ... E90 / E92Model Year: 2007 - 2013. E46Model Year: 2000 - 2006. M4 ...

2019年6月22日 · - Old CAS - Replacement used CAS - INPA - Downloaded E89 SP-Daten - NCS Expert Installed (Most profiles I got have "expert" or so in the name). - ISTA-D - Other BMW Tools Software Some other details to note; - Old CAS still responds to tools and can read it properly. Its shows the yello steering lock symbol but ELV Counter Reset seem not to be ...

2020年4月19日 · In the case with the CAS module winkfp was wanting to update to ZB 9395657 but ISTA-P is saying 9389115 was the latest update. ISTA-P was definitely right here, and as you say it's probably because it understands the latest I-Level.

2013年4月27日 · Yes, the CAS (Car access system) is the only module which must be programmed when ignition if OFF. I'm not saying that you should just connect your cable and that's all, you should first turn the ignition ON when cable is plugged in and then turn OFF and take out the key from the slot. Now you should programm CAS using WINKFP.

2021年5月14日 · A0B4- CAS: Engine start, starter operation. Terminal 50 to CAS I verified the volts from the battery: 12.3v+ and I had the battery examined at a local auto-shop. The battery tests out good though its 3 years old. A year before I did do a MSD80 to 81 swap, programmed remotely. Is my next logical step to replace the starter?

2015年4月25日 · I am looking for the 2011 335d CAS module location.(module that controls comfort access features) Going to swap out with new one to see if it resolves my issues. Any help appreciated. Last edited by rogerdiaz; 04-24-2015 at 08:45 PM ..

2020年9月15日 · Hello and good day. I believe my DME in my 2011 335i xDrive (e90) may have just fried. So from what I understand I can just buy a used matched pair (DME and CAS) and the car will run again? No MHD or JB4, just stock. Or does the cluster not communicate properly then? I'm sorry for the dumb questions, I am in a panic, and reaching for straws.

2016年2月23日 · I believe I'm having an issue with transport mode and that this setting might be within the CAS module. Reasons are: Car keeps saying it needs a service Car says it needs pre-delivery check done Car wont store any service info written to it by ISTA or idrive (BC button). Key fob is storing no service info. It does store mileage