
edxia: Microstructure characterisation from quantified SEM-EDS ...
2021年3月1日 · To illustrate the robustness of the edxia approach, a CEM I Ordinary Portland Cement (OPC) and blended system were chosen as examples of cementitious microstructures with different levels of complexity. More specifically, the blended system is a limestone calcined clay (LC3) cement paste [22].
Investigation of the calcined kaolinite content on the hydration of ...
The results show that the quantities of ettringite and carbo-aluminate phases significantly reduce when LC 3 is cured at 50°C. EDX analysis shows that significant quantities of aluminate are taken up in C-AS -H, when curing is done at a higher temperature.
Microstructural developments of limestone calcined clay cement (LC3 ...
2022年3月1日 · In this paper, a detailed study of phase assemblage, porosity evolution and microstructural development was conducted on LC 3 samples hydrated up to 3 years and compared to 90 days specimens. It was observed that the reaction of clinker phases and metakaolin continues between 90 days and 3 years, even after depletion of portlandite.
Development of the Microstructure in LC3 Systems and Its …
2017年10月28日 · The results are supported by compositional analysis of the microstructure by Energy Dispersive X-ray (EDX) analysis and X-Ray Diffraction (XRD). The durability potential of this improved microstructure development seen in LC3 and its effect on the chloride ingress in comparison with OPC and FA30 concretes after an extended period of curing (1 ...
Hydration and phase assemblage of ternary cements with calcined …
2019年10月20日 · Additional ettringite is formed when gypsum content is increased in LC 3. The limestone reactivity reduces when gypsum is increased in LC 3. This study aims to understand the impact of calcined clay, limestone and gypsum on the hydration mechanisms and phase development in limestone calcined clay cement (LC 3).
Influence of temperature on hydration and microstructure properties of ...
2019年8月24日 · The results show that the quantities of ettringite and carbo-aluminate phases significantly reduce when LC3 is cured at 50 °C. EDX analysis shows that significant quantities of aluminate are taken up in C–A–S–H, when curing is done at a higher temperature.
(PDF) Effects of Gypsum on LC3 Ternary Cements - Academia.edu
The results show that the quantities of ettringite and carbo-aluminate phases significantly reduce when LC 3 is cured at 50°C. EDX analysis shows that significant quantities of aluminate are taken up in C-AS -H, when curing is done at a higher temperature.
Effects of clay type and component fineness on the hydration and ...
2024年9月16日 · Limestone calcined clay cement (LC 3) is emerging as an alternative to Portland cement, offering economic advantages, reduced CO 2 emissions, and mechanical properties on par with Portland cement. Central to the effective utilization of LC 3 is understanding how the fineness of its components affects its performance.
(PDF) Simple automation of SEM‐EDS spectral maps
2022年3月15日 · In this paper, we use SEM-EDX hypermaps to quantify the chloride sorption in hydrated an C3S paste, after equilibrium in solutions of chloride salts (NaCl, KCl, CaCl2, MgCl2), with and without...
Use of spent fluid catalytic cracking catalyst (FCC) in Limestone ...
2024年4月20日 · A field emission scanning electron microscopy (FESEM – ULTRA 55 Zeiss Oxford instruments), containing an X-ray energy dispersive detector (EDX, Oxford Instruments), was used to assess the microstructure of pastes.
- 某些结果已被删除