iso 3506-1：2020（中文） 下载积分： 900 内容提示： ISO 3506-1：2020 紧固件 耐腐蚀不锈钢紧固件的机械性能 第 1 部分： 具有规定组别和性能等级的螺栓，螺钉和螺柱

International Standard ISO 3506-1 was prepared by Technical Committee ISO/TC 2, Fasteners, Sub-Committee SC 1, Mechanical properties of fasteners. This first edition, together with ISO 3506-2 and ISO 3506-3, cancels and replaces ISO 3506:1979, which has …

ISO 3506-6 provides general rules and additional technical information on suitable stainless steels and their properties. Fasteners conforming to the requirements of this document are evaluated at the ambient temperature

不锈钢螺栓、螺钉和螺柱的机械性能 - 奥氏体和双相不锈钢组（iso 3506-1:2020）

ISO 3506‑6 provides general rules and additional technical information on suitable stainless steels and their properties. Fasteners conforming to the requirements of this document are evaluated at the ambient temperature specified in paragraph 1.

iso 3506-1:2020(e) — the wedge tensile test (see 9.4) and hardness test (see 9.6) have been improved; — marking and labelling (see Clause 10) have been improved, and fasteners with reduced loadability

(高清版）bs en iso 3506-1-2020 下载积分： 3300 内容提示： BSI Standards PublicationFasteners – Mechanical properties of corrosion-resistant stainless steel fastenersPart 1: Bolts, screws and studs with specified grades and property classesBS EN ISO 3506-1:2020

This part of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 °C to 35 °C.

2013年1月1日 · 本文件规定了在10°C至35°C的环境温度范围内进行试验时，由耐腐蚀不锈钢制成的粗螺距螺纹和细螺距螺纹的螺栓、螺钉和螺柱的机械和物理性能。 本文件规定了与奥氏体、马氏体有关的性能等级，紧固件用铁素体和双相（奥氏体-铁素体）钢级。 当螺栓、螺钉和螺柱一起考虑时，本文件中使用术语“紧固件”。 ISO 3506-6提供了适用不锈钢及其性能的一般规则和附加技术信息。 在第1段中规定的环境温度下，对符合本文件要求的紧固件进行评估。 它们在高温和/ …

ISO 3506-2, Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts with specified grades and property classes [10] ISO 3506-3, Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress [11]