2012年10月10日 · Personally, I generally find EQ bands more confusing than helpful, and always love to see pre-sets (gasp! egads!). I guess I just don’t have the patience that EQ bands demand for tinkering. marvin_martian October 11, 2012, 3:21am

2009年12月25日 · Well, the way you’re using the eq, turning down the higher freq bands rather than simply boosting the low freq band, should actually improve battery life. The flaw in the diagrams is that there is usually overlap between the bands causing peaks and valleys in the frequency response curve, which IMO is something to be avoided.

2008年1月27日 · An admitted EQ neophyte here, and as much as I try to understand multiple EQ bands beyond the old bass and treble knobs on stereos, it just doesn’t get through. So, right now with my (nice) phones, there is a slightly m…

2011年1月22日 · At least the excellent EQ should let you compensate for the slight difference you hear…although it may involve changing up some frequency bands from their stock settings. I only need about 2 hours max play time between charges most of the time, 4 hours tops.

2008年8月28日 · The EQ takes a wee bit more power from the battery, in the form of boosted audio levels (slight) and processor operations (also slight), when selected. In the real world, dropping or increasing the volume a click or two as you listen most likely has the same net effect, in terms of power consumption.

2008年1月23日 · Using good heaphones and lifting up some bands on an EQ, I do however, notice a VERY slight loss in the quality of the cymbals, but just listening to it casually and without any EQ turned on, you couldn’t really tell it. I’m not really complaining with that, because it’s just going to be used for my own personal listening through the ...

2009年5月28日 · Replay gain on, pre gain 12db, all custom eq to +12. You’re going to ruin your ears , if you haven’t already. I just pulled my V150’s down, and I don’t use the replay gain, but a louder album, EQ Normal, max volume with those headphones is definitely way too loud…I didn’t make it 10 seconds.

2008年10月7日 · Sorry; I’ve been away for a while. Yes; Jazz setting could be sharp on some material. Still, on well recorded music (Telarc, Blue Note, Sheffield Lab, etc) it sounds very good. I was fooling around with custom settings trying to get as close as possible to Jazz equalizer and I think that I came pretty close. Then I’ve added a click or …

2009年1月25日 · Generally you get the buzzing for 1 of three reasons. The First and most common is a bad EQ setting as P_Opus suggested, but the other reasons behind the humming could be a crossed circuit interferance, or another chord with perhaps not enough plastic coating so it emits a bit of electircal current crossing the input line could cause the hum.

2013年5月6日 · FYI: The Jazz preset on each covers the most musical styles with the most balance, for lazy people like me. But it would be some kinda nice to have firmware that let you preset EQ for albums, songs, genres… I don’t find the Jazz setting has any bass to it personally. Even less than running no EQ at all, which is the way I run mine.