The router eigrp command entered in global configuration mode with autonomous-system-number argument creates an EIGRP routing instance. It is the first step in configuring EIGRP on a router as done here on R1:

2014年11月24日 · The show ip eigrp command displays prefix accounting information for EIGRP processes. The following is sample output from this command:

It’s time for the exciting part of our Enhanced Interior Gateway Routing Protocol, or EIGRP, discussion, configuration. Let’s setup EIGRP on our branch router and our HQ router. And let’s ensure that HQ has the ability to route to the 10.1.1.0/24 network and branch, and send traffic over to 172.16.1.0/24.

Configure EIGRP for the shown network using EIGRP 90. Corporate policy dictates that you must use specific wildcard mask on R2 and R3. In addition EIGRP should be configured in such a way that is does not operate like a class full routing protocol. Finally, the BB Router has a static Route to 192.168.1.0/24.

2025年3月18日 · This tutorial explains how to configure the EIGRP routing protocol on Cisco routers. Learn EIGRP configuration and commands via a packet tracer example.

2022年1月11日 · The traditional way to configure EIGRP requires various parameters to be configured under the interface and EIGRP configuration mode. In order to configure EIGRP IPV4 and IPv6, it is required to configure separate EIGRP instances.

Let’s take a look to figure below and configure this topology via EIGRP step by step. Configure the network above with EIGRP using Autonomous system number 90. Use the spesific wildcard masks for R2 and R3. Additionally EIGRP shouldn’t work as a classful routing protocol.

2022年9月14日 · Download below EIGRP PDF Document with 22 scenarios I used in the past for my certification preparation with the following content, these scenarios are useful to prepare the CCNP Enterprise ENARSI exam: Lab 1: EIGRP Different AS Distribute-List

2021年12月3日 · Enhanced Interior Gateway Routing Protocol (EIGRP) is a dynamic routing network-layer Protocol which works on protocol number 88. EIGRP supports classless routing, VLSM, route summarization, load balancing, and many other useful features.

EIGRP is a distance-vector protocol and is based on the DUAL algorithms. As a distance-vector protocol, the EIGRP router send updates to its neighbors as networks change, thus allowing the convergence to a known topology. eigrpd supports EIGRP as described in RFC7868.