The EL9110 potential feed terminal with diagnostics enables the setup of different potential groups with the standard voltage 24 V DC. The supply voltage is taken up via the front terminal contacts and passed through to the adjacent terminals via the internal power contacts.

带诊断功能的供电端子模块 EL9110 能够建立带标准 24 V DC 电压的电位组。它通过端子模块正面触点接入电源，并通过内置的电源触点连通至相邻的端子模块。EL9110 可以向 EtherCAT 耦合器实时报告供电端子模块的状态，以监控电源电压。电源 LED

The EL9110 is a single channel differential receiver and equalizer. It contains a high speed differential receiver with 5 programmable poles. The outputs of these pole blocks are then summed into an output buffer. The equalization length is set with the voltage on a single pin.

The EL9100, EL9110 and EL9190 feed terminal can be positioned at any location between the input and output terminals for establishing a further potential group or for supplying the terminals following on the right in applications with high current load. The E-Bus is looped through.

The EL9110 is a single channel differential receiver and equalizer. It contains a High-Speed differential receiver with 5 programmable poles. The outputs of these pole blocks are then summed into an output buffer. The equalization length is set with the voltage on a single pin.

Bring the bus system into a safe, powered down state before starting installation, disassembly or wiring of the Bus Terminals! ** only EL9100, EL9110. The EL9110 has a bit width of 1 bit (diagnosis bit for the power contacts voltage, "PowerOK") and is displayed in …

EL9100, EL9110, EL9190 - Introduction and Technical Data; © 2023 Beckhoff Automation

The EL9110 is a single channel differential receiver and equalizer. It contains a High-Speed differential receiver with 5 programmable poles. The outputs of these pole blocks are then summed into an output buffer. The equalization length is set with the voltage on a single pin.

该el9110是一个单一通道差分接收器和均衡.它包含一个 高速差分接收器,具有5个可编程极点.这些磁极块输出被求和 然后到输出缓冲器.均衡长度设定与在单个引脚电压.

The EL9110 is a single channel differential receiver and equalizer. It contains a High-Speed differential receiver with 5 programmable poles. The outputs of these pole blocks are then summed into an output buffer. The equalization length is set with the voltage on a single pin.