2019年5月5日 · In simple terms wheel offset or ET is the distance between the hub mounting face and the line that cuts through the centre of your wheel. You can usually find the offset engraved or stamped into the wheel.

2020年4月20日 · ET indicates the distance between the mounting surface and the geometric centre of the wheel (the symmetry axle), usually expressed in millimetres. When the ET value decreases, the alloy wheels will protrude further out. An increased ET value, on the other hand, results in moving the wheel location deeper into the wheel arch.

2024年11月14日 · Finding your ideal wheel offset, known as ET, is crucial for that tailored look and precise handling. The right offset means your wheels sit in harmony with your car’s wheel arches. The ET number reflects how your wheel’s mounting face lines up …

The offset of the wheel is a measurement taken from the centerline of the wheel to the mounting pad of the wheel. The higher the offset the closer the wheel is to your chassis. If you used our Search By Vehicle tool we will only show you offset ranges that are within range for your vehicle.

2018年3月17日 · ET，也就是俗称的 Offset ，其实就是轮圈的偏距值，意即轮圈侧面的中心线与轮轴（Hub）之间的距离，单位为mm（ET40 即是 40mm 的意思）。 ET 值越大，轮圈就会越缩进轮拱；相反的，越小的 ET 值轮圈就会越加超出轮拱。 ET 值有正值也有负数值，一般轿车的轮圈 ET 值通常都是正值，只有少数车款尤其是四驱车才会采用负数值的 Offset。 比方说，一辆车的偏距值为 ET40 ，若是换上数值为 ET45 的轮圈，那在视觉上新的轮圈会比原来的轮圈更缩入轮拱内 …

ET, or wheel offset from the German term EinpressTiefe, is a standardized value expressed in millimeters. ET represents the distance from the mounting (contact) surface of the wheel’s rim/disc to the center plane of the wheel. If ET is zero, the mounting surface of the rim/disc lies in the center plane of the wheel.

2022年12月20日 · When shopping for new wheels, the offset is measured with the ET number. ET originally comes from the German word einpresstiefe, which means insertion depth, and as previously mentioned, it is measured in mm. For example, ET0 is an equivalent of a neutral offset, while ET30 would be a measurement for a wheel with a positive offset.

The abbreviation “ET” stands for “offset” and refers to the distance between the rim’s center and the rim’s contact surface. The offset value is expressed in millimeters (mm) and can have both positive and negative values.

2017年1月11日 · Let's go over it again, even more thorough: The wheel offset (ET is another word for it) of a rim is the distance from the center line of the rim to the surface where the rim mounts to the vehicle. By center line we mean the absolute center of the rim, if we would cut the rim in two equal sizes regarding the width.

In practice, the ET-value is the number in millimetres that the centre line of the wheel deviates from the mounting surface (on the wheel hub). As a rule of thumb: the higher the ET, the more a wheel is positioned inwards; the lower the ET, the more a wheel protrudes outwards.