Flannery’s Drywall Reveal F-Molds create an aesthetic division between drywall and dissimilar materials including door and window frames, ceilings, and floors. Drywall F-Molds can be used to terminate drywall at the top or bottom of vertical walls. It …

The F mold creates a reveal where plaster terminates against dissimilar material or sills, jambs and ceilings. The F Reveal can be vented for use in a soffit for ventilation and can be bent for radius applications.

F Vertical Transition Molding Flush 7906 Drywall-to-Acoustical Tegular 7907 – 9/16" and 7908 – 15/16" Stepped 7913 – 9/16" and 7914 – 15/16" 5/8" Gypsum board 1-1/4" Drywall screw Acoustical lay-in Exposed Tee grid 7913 – F-Molding DGS to 9/16" Acoustical Acoustical lay-in Exposed Tee grid ® ®®; ™ 3/8" Acoustical

Flannery’s Plaster F-Mold (FPM) is a metal stucco wall trim that creates an aesthetic termination reveal in any stucco wall system. Typically installed where a stucco wall terminates at an opposing wall or dissimilar material, the Plaster F-Mold can act as a …

Fry Reglet F Acoustical Reveal provides a clean termination for installation of 7/8” acoustical tile for glued-in acoustic ceiling applications and provides a crisp reveal in the ceiling at wall/ceiling joint.

Fry Reglet's Fiber Cement Panel F Molding creates a 1/2” traditional reveal at terminations of 5/16” fiber cement panels.

Flannery’s Smooth Finish F-Mold creates an aesthetic termination reveal in any stucco wall system. Typically installed where a stucco wall terminates at an opposing wall or dissimilar material, the Smooth Finish F-Mold can act as a stucco stop with a built in reveal.

Flannery’s Plaster F-Mold creates an aesthetic termination reveal in any stucco wall system. Typically installed where a stucco wall terminates at an opposing wall or dissimilar material, the Plaster F-Mold can act as a stucco stop with a built in reveal.

May be used in either drywall or acoustical applications. Can be laminated for vinyl wall covering application. "F" Molding shall be Plastic Components Inc. #________. All drywall accessories shall conform to ASTM standards D3678 and C1047. All products shall be third party tested to meet ASTM standard D4216 and be Canadian Code Compliant.

F MOLD-FCP Installation Guide Stockton Submittal System Note: This Installation Guide is supplied solely to assist in the selection and application of product manufactured by Stockton Products.