2003年10月19日 · 1999 to 2016 Super Duty - F250 PS on 44's - I'm in the process of looking for a F250 to purchase in the hopefully near future, and stumbled across this truck. After a total of 20 inches of lift, and throwing some 44's underneath it, and has a HYPERTECH POWER PROGRAMMER which added over 100 horsepower, how's he still...

2011年10月6日 · 1987 - 1996 F150 & Larger F-Series Trucks - F-250 on 40s or 44s. TTI question - Well, I finally figured out my F-250 has a 460 bad / broken rings. I am going to fix that when I have time and in the mean time I found a seemingly great deal on a 1997 7.3 diesel to tow with.

2010年8月27日 · If you got the f250 d44s they are most likely the 8 lug versions correct? If you ran them at full width with an h2 wheel and a 12.5 tire they will be 80" from the outside of one tire to the outside of the other. I had the same concearns and have gotten this …

2010年4月7日 · Ground Hawgs of this size measure closer to 40 inches than they do to 44. Thats goo d and bad at the same time. At any rate, front axle carnage will probably occur sooner than later, but what the hey.

2007年3月9日 · If you want a trail rig with a low center of gravity and 44's, here is my recipe for 42's: Suspension: 1. Two added springs to the stock front spring pack. 2. Remove the rear factory lift blocks. 3. Add 6" lift cheap Pro-Comp rear springs. Why: This nets approximately 2" of lift, front and rear (after the rear settles in a month or two).

2006年11月26日 · im looking at putting 44s on my 2002 f250 and i was wandering how much lift i needed to clear them well....ive been looking at the 12.5 inch donahoe racing suspension lift and was just wandering if i would need more lift

2009年8月29日 · 2003 F250 on 44s. Jump to Latest 1.4K views 6 replies 3 participants last post by Purecetane22 Aug 31, 2009. Purecetane22 ...

Endwell trails muddin 3/30/13

Starting on my project truck 1977 Ford hopefully have it ready this summer gota add hydro steering going to add sterlin 10.25 and a dana 60 front but going t...

2011年5月3日 · Has anyone run 44s with an 8" lift and cutouts? If so how were they on rubbing? THat will be close as heck. I have 8" on my old 99 and I could run 40's without cut outs but they rubbed on the leaf springs even with deep dish wheels. They will probably clear the body on flat ground but I am sure they will be all up in your springs.