2007年6月19日 · Topic For information about TCP and UDP ports on BIG-IP LTM versions 9.x - 11.x, refer to the following solutions: K7317: Overview of port lockdown behavior (9.x) K13250: Overview of port lockdown behavior (10.x - 11.x) The BIG-IP will drop most packets that arrive at an external interface with a destination of the BIG-IP self IP address.

2015年10月13日 · When planning deployments using BIG-IP Edge Client for Windows, you should ensure client-side firewalls do not block addresses or ports needed for BIG-IP Edge Client component communication.

2019年7月22日 · When BIG-IP redundant systems are configured to use network failover, the systems communicate over the configured failover addresses. The following table displays the transport protocol and service port used for BIG-IP network failover.

If you want to specify multiple service ports as the source or destination port on a virtual server, you must first create a port list, using the Shared Objects area of the BIG-IP Configuration utility. A port list contains a list of ports that a virtual server can listen for …

You can create a port list that contains one or more service ports. The new port list can be referenced later when modifying or creating a rule list.

The front-panel ports on F5 r2000/r4000 systems support port profile functionality. Port profiles enable you to change which mode, or port speed, that port uses. SFP28 ports operate at 25GbE by default, and SFP+ ports operate at 10GbE by default.

The Intel chipset supports three different port profiles that allow a maximum of 100Gb of front panel bandwidth to be enabled at one time. This means that some ports may be disabled based on the port profile that is selected, as there is a possibility of 140Gb total bandwidth if all eight ports are configured for maximum speed.

port-list - Configures a port-list for use by firewall rules. firewall rule can match a packet's source port or destination port. against one of the ports in a port list, and can take some action (such. as ACCEPT or DROP) for a matching packet. security firewall. CREATE/MODIFY. create port-list [name] modify port-list [[name] | all] options:

2021年3月30日 · Last month, community member Racquel Mays asked for some assistance with creating a local traffic policy to apply to a virtual server to listen only on specific ports. I knew of only two obvious ways to solve that problem until fellow F5er Simon Blakely dumped a whole bowl of awesome sauce on us.

Port lists - a configuration object containing multiple service ports. Your firewall policy workflow should begin with creating address and port lists.