The Fan Coil Actuator supports the ABB i-bus Tool for advanced diagnosis and improved commissioning. To control typical fan coil units by four electronic outputs for thermoelectric or motor-driven valve drives and a 3 channel output for a up to 3-stage fan.

FCA/S1.1.1.2 Fan Coil Actuator, PWM, MDRC Long Description: Control typical fan coil units by four electronic outputs for thermoelectric or motor-driven valve drives and a 3 channel output for a fan with up to 3 stages.

The Fan Coil Actuator FCA/S 1.1M has two outputs for control of motor power operated or thermal heating and cooling valves. Fan Coil Actuators switch multi-level fans with up to three fan speeds using floating

The Fan Coil Actuators FCA/S control a single-phase fan with up to three fan speeds via a step or changeover control. In the operation mode Changeover , the actuators ensure that no two fan speeds can

The FCA/S 1.1M can control motorised and thermal heating and cooling valves via the ABB i-bus®. The fan coil actuator receives its control value from the bus, e.g., from a room thermostat. The actuator does not require an additional power supply. Technical data (excerpt)

Software-Information ABB i-bus KNX Product: Fan Coil Actuator Type: FCA/S 1.1M Current application program: Fan Coil Actuator/1.3a Software-Information to: Fan Coil Actuator/1.3a from: 07/2013 1. General

The Fan Coil Actuator FCA/S 1.1M is a modular installation device (MDRC) in pro M design. It is intended for installation in the distribution board on 35 mm mounting rails. The assignment of the physical address as well as the parameter settings is carried out with ETS 2 …

The Fan Coil Actuator supports the ABB i-bus Tool for advanced diagnosis and improved commissioning. Controls typical fan coil units by two analogue outputs for 0 - 10 V valve drives and a 3 channel output for fan with up to 3 stages. A additional load (up to 16 A) like a auxiliary heating can be controlled by a switch output.

De Fan-coil-actoren FCA/S 1.2.x.2 hebben twee uitgangen voor de aansturing van analoge verwarmings- en koelkleppen. 1.1 Gebruik van het producthandboek In dit handboek vindt u gedetailleerde technische informatie over de werking, montage en programmering van het ABB i-bus® KNX-apparaat. Het gebruik wordt aan de hand van voorbeelden uitgelegd.

ABB i-bus KNX intelligent building control integrates the heating, air-conditioning and ventilation to a coherent and efficient climate control. Measured temperature values in the rooms are recorded and supplied to the heating and cooling control to generate the …