§ 571.206 Standard No. 206; Door locks and door retention components. S1. Scope and Purpose. This standard specifies requirements for vehicle door locks and door retention components, …

Federal Motor Vehicle Safety Standard (FMVSS) No. 206 establishes minimum performance requirements for motor vehicle door locks and door retention components. The purpose of Standard 206 is to minimize the likelihood of occupants being thrown from a …

FMVSS No. 206 requires that door latch systems on hinged doors and sliding doors remain engaged when subject to an inertial force of 30 g in the longitudinal and transverse directions.

This standard specifies requirements for vehicle door locks and door retention components, including latches, hinges, and other supporting means, to minimize the likelihood of occupants being ejected from a vehicle as a result of impact. S2. Application.

It specifies requirements for side and back door locks and door retention components, including latches, hinges, and other supporting means, to minimize the likelihood of occupants being thrown from the vehicle as a result of impact. Applicability: Read the Complete Standard.

View the most recent version of this document on this website. Regulatory Information. Code of Federal Regulations (annual edition) AE 2.106/3:49/ Section 571.206 - Standard No. 206; Door locks and door retention components. October 1, 2011.

LABORATORY TEST PROCEDURE FOR FMVSS 206 - Door Locks and Door Retention Components

《 美国联邦机动车辆安全标准206》(FMVSS 206)“列出对车辆门锁和车门保持件( 包括闩锁、铰链和其它支承部件) 的具体要求,以便尽量减少车辆碰撞导致的乘员被摔出车外的可能性。

FMVSS 206安全标准的设计和试验要求一级和二级锁定位置，且未开启时必须可以承受横向和纵向负荷力及惯性力。 某些TriMark产品符合FMVSS 206，且在TriMark的目录和出版物上进行了标识。 根据SAE J839的负荷要求，这些产品已全面测试。 此外，TriMark或车辆厂商必须进行全面的门系统分析，并保证以下项目符合要求：门锁具的所有组件、针对惯性的门保持组件以及内部锁定。 点击 此处，以查看TriMark的FMVSS 206试验指南。 这个一份PDF文档。 如果您不能阅读PDF …

The design and testing requirements of the FMVSS 206 safety standard require a primary and secondary latching position and must withstand transverse and longitudinal load forces and inertial forces without opening.