2012年2月28日 · The Ford FI six is a good motor and $150 with a five-speed is a good price, but what xfer case? If centered, then you're swapping the axle. It doesn't have the low-end torque of a 2f and that's a lot of work to swap in something that's going to be hard to sell in the future.

2017年2月22日 · 1967 FJ40 Dune Beige 416, LS swap (5.3l and 4L60e), 4" Safari lift,, 4 wheel disc brakes, Saginaw Power Steering AND YES I KNOW THE SHACKLES ARE REVERSED Had to do it for the power steering. 2017 Tacoma TRD Offroad Sand

2010年3月3日 · 77 FJ40 - 350/TH350/Atlas 3.8, ARB'd FJ40 Front with hydro assist, Detriot Mini-Truck Rear, leafs up front 4 link in rear, 40" TSLs with internal beadlocks 12/70 FJ40 - F - 3 on the tree - 37's SOA & Wilwood front Discs - creampuff wannabe

2007年1月31日 · Looking for the correct shocks for an SUA FJ40 (intended for up to 50mm lift over stock) but realized it’s not that easy to find the compressed and extended length numbers. I figure it’s ideal to determine the compressed and extended limits (eye to eye) of your vehicle's suspension as a primary consideration prior to selecting and matching ...

2004年3月3日 · Automatic: 350 and a 700R4. Manual: 350 and an NV4500/NP205. Manual with stock drive train: 350 and a Mark's of Australia conversion kit (sold by Advance Adapters).

2017年3月2日 · The principle was simple: get more shock, and more shock travel, and retain the original shock geometry, without having to remove the stock tower. The Ford shock tower option was already well known in the off road forums, but it had and still has two major drawbacks.

2009年6月4日 · My son wants to do a diesel in our 1980 fj40 when we start working on it in the fall for his high school senior project. It has older drum axles so pretty sure 4.11 gears. Stock 2f engine and trans. We will be doing a 4 inch lift SUA, and looking for disk axles but keep 4.11 gears and run 33...

2009年8月25日 · 69' Fj40 The Ultimate FZJ40 88' FJ62 (Off the Frame LOL) 13' Limited 4Runner on 35's and mild lift. 20' Ford Raptor

2011年4月6日 · 1970 FJ40 with a Ford 302 V8 It ran pretty well for the last two years then all of the sudden it won't start. It cranks just fine but there is no spark. I decided it was time to do a lite overhaul and see if that fixed anything. I installed a new Edelbrock Carb, New spark plugs and wires, replaced points style distributor with HEI style ...

2007年7月24日 · The stock carb on many Ford 1600 I-4 engines was the bbl 731F-BDA. It has a throttle bore of 1.342". From the top it looks like a single round throttle bore. It likes 3.5 to 4.5 lbs of fuel pressure, which is on the low side and is susceptible to vapor lock. The 1600 is a British Ford engine used on cars like the Cortina.