The R&S®FSMR3000 is a microwave measurement receiver to calibrate signal generators and attenuators with one single instrument. Most important features provided are tuned RF level measurements, level measurements, analog modulation and spectrum analysis.

2017年6月12日 · A Test Port Adapter System is implemented for all Rohde & Schwarz equipment, which operates above 26 GHz in order to protect the RF front-end from mechanical damage. The Test Port Adapter System consists of an RF front-end interface called the Test Port Adapter Body, and the Test Port Adapter Head which is attached to the Body.

Measurements of low power RF signals will be performed in the Tuned RF Level mode with highest accuracy. The FSMR will automatically handle all required settings. Main Receiver Functions The measurement of RF levels over a wide input level range is performed in three different level ranges. Page 10 In the message box, confirm CONTINUE and press ...

测量接收机r&s®fsmr专门用于完成对信号发 生器和固定式(或可调节式)衰减器进行校准 所涉及的相应测量任务。 r&s®fsmr 集几种仪器的功能于一身，因此它能够对信号发 生器的所有重要参数进行校准。 另外，r&s®fsmr 还提供了全面的频谱分析仪功能，例如测

R&S®FSMR Measuring Receiver - Product Brochure The R&S®FSMR measuring receiver has been specially designed to handle the measurement tasks involved in the calibration of signal generators and fixed or adjustable attenuators.

Featuring a large, selectable measurement band-width from 100 Hz to 10 MHz, the R&S®FSMR is insensi-tive to frequency offset or residual FM of the generator to be calibrated. Very small levels are measured using the narrow detector, which determines the signal power within the measurement bandwidth with FFT at a reduced noise bandwidth.

2021年12月31日 · r&s®fsmr3000（以下简称为 fsmr）三合一仪器集成了测量接收机、信号与频谱分析仪以及相位噪声分析。 本应用指南展示了使用配备互相关选件 r&s®fsmr3-b60 的 fsmr 测量原始信号发生器 r&s®sma100b 的相位噪声特性。

R&S FSMR Measurement Examples Example 2: Low RF Level Measurements with Tuned RF Level Mode Measurement The main functionality of a measuring receiver is the RF level measurement. Measurements of low power RF signals will be performed in the Tuned RF Level mode with highest accuracy. The FSMR will automatically handle all required settings.

使用热功率探头（如 nrp50t）测量固定电平条件下信号源的绝对输出电平，并将测量读数输出到 fsmr。 直接将 FSMR 连接至信号源，并扫描信号源的功率，然后在宽动态范围（涵盖低功率）执行输出功率校准。

The R&S®FSMR performs absolute RF level measurements when the R&S®NRP-Zxx power sensors are connected to the R&S ® FSMR. The R&S ® NRP-Z27 and R&S ® NRP-Z37 power sensor modules include a power splitter.